| Author |
 Topic Search  Topic Options
|
orangereborn 
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1422
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 6140 Hyd level check
Posted: 25 Jan 2024 at 5:15pm |
|
someone contacted me as to where the Hyd level check is on the 6140. Don't have one and don't know... ??? For starters I told him to check around the seat and shift lever area. Thanks. Dale
Edited by orangereborn - 25 Jan 2024 at 6:07pm
|
 |
|
Sponsored Links
|
|
|
AC720Man
Orange Level
Joined: 10 Oct 2016
Location: Shenandoah, Va
Points: 4847
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2024 at 11:07pm |
|
Dale I’m going out on a short limb here but I think it was mainly sheet metal changes, there were some other changes but it’s basically a 160. Look down to the right side of the seat and look for a round plug that a 3/8” drive socket wrench fits in to remove it. Now that I think of it I may be confusing it with the 6040. Regardless that would be a good place for him to check.
Edited by AC720Man - 27 Jan 2024 at 11:13pm
|
|
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|
tbran
Orange Level
Joined: 14 Sep 2009
Location: Paris Tn
Points: 3275
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Jan 2024 at 11:53pm |
Sort rubber like plug on shift cover under seat with dipstick on it. It is a 6140 not a 6040.
|
|
When told "it's not the money,it's the principle", remember, it's always the money..
|
|
DSeries4
Orange Level
Joined: 12 Sep 2009
Location: Ontario, Canada
Points: 7303
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2024 at 9:51am |
 AC720Man wrote:
Dale I’m going out on a short limb here but I think it was mainly sheet metal changes, there were some other changes but it’s basically a 160. Look down to the right side of the seat and look for a round plug that a 3/8” drive socket wrench fits in to remove it. Now that I think of it I may be confusing it with the 6040. Regardless that would be a good place for him to check. |
160 Turned into the 6040. The 6140 is a completely different animal from Japan.
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1422
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2024 at 4:49pm |
|
Thanks gentlemen. I went digging in the book boxes and found an Operators manual. It was what you suggested and I had offered originally. Sent him some pictures. That little tractor with front wheel assist has always been on my list.. but after hauling a couple of those and both had front end problems I started to wonder.. Dale
|
|
