301/ etc pulling parts

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I have a few parts from past pulling ventures if anyone may be interested.....

1- 4" air shutoff/ tube and raincap
1- 4" chrome pipe and elbow, think I had this on a 3LM-466 charger maybe? V-band     clamp flange is 4-1/2"

2- new bigfoot copper turbo gaskets (bigger than T04/ 3LM)
2- used copper gaskets
1- new steel turbo flange, fits with copper gaskets/
1- new flange (steel) for intake manifold....we built a 3" turbo to intake pipe and used these on the intake manifold side of the pipe (after having the hole in a 426 intercooler manifold bored to 3" and re-tapped)

1- cover for crankshaft balancer on 301...has mounting holes for Isspro tach pickup when we used an analog gauge, mounts using timing cover bolts...

if anyone has any interest let me know.

Also have some pullout pistons/ sleeves that are in good shape, a block (2800), cam&gear (no bolt in center) and some valvetrain and valve covers.  Block has already been dipped/ checked.

Slade (TN)
615-542-6999

And my pic as usual is skewed!!

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Slade (TN) Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: TN Points: 676	Post Options Post Reply Quote Slade (TN) Report Post Thanks(0) Quote Reply Topic: 301/ etc pulling parts Posted: 16 Dec 2013 at 10:36am
	I have a few parts from past pulling ventures if anyone may be interested..... 1- 4" air shutoff/ tube and raincap 1- 4" chrome pipe and elbow, think I had this on a 3LM-466 charger maybe? V-band clamp flange is 4-1/2" 2- new bigfoot copper turbo gaskets (bigger than T04/ 3LM) 2- used copper gaskets 1- new steel turbo flange, fits with copper gaskets/ 1- new flange (steel) for intake manifold....we built a 3" turbo to intake pipe and used these on the intake manifold side of the pipe (after having the hole in a 426 intercooler manifold bored to 3" and re-tapped) 1- cover for crankshaft balancer on 301...has mounting holes for Isspro tach pickup when we used an analog gauge, mounts using timing cover bolts... if anyone has any interest let me know. Also have some pullout pistons/ sleeves that are in good shape, a block (2800), cam&gear (no bolt in center) and some valvetrain and valve covers. Block has already been dipped/ checked. Slade (TN) 615-542-6999 And my pic as usual is skewed!!

Sponsored Links