301/ etc pulling parts
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=81851
Printed Date: 17 May 2024 at 1:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 301/ etc pulling parts
Posted By: Slade (TN)
Subject: 301/ etc pulling parts
Date Posted: 16 Dec 2013 at 10:36am
|
I have a few parts from past pulling ventures if anyone may be interested..... 1- 4" air shutoff/ tube and raincap 1- 4" chrome pipe and elbow, think I had this on a 3LM-466 charger maybe? V-band clamp flange is 4-1/2" 2- new bigfoot copper turbo gaskets (bigger than T04/ 3LM) 2- used copper gaskets 1- new steel turbo flange, fits with copper gaskets/ 1- new flange (steel) for intake manifold....we built a 3" turbo to intake pipe and used these on the intake manifold side of the pipe (after having the hole in a 426 intercooler manifold bored to 3" and re-tapped) 1- cover for crankshaft balancer on 301...has mounting holes for Isspro tach pickup when we used an analog gauge, mounts using timing cover bolts... if anyone has any interest let me know. Also have some pullout pistons/ sleeves that are in good shape, a block (2800), cam&gear (no bolt in center) and some valvetrain and valve covers. Block has already been dipped/ checked. Slade (TN) 615-542-6999 And my pic as usual is skewed!!  |