| Author |
 Topic Search  Topic Options
|
Eldon (WA) 
Orange Level
Joined: 11 Sep 2009
Location: Spokane, WA
Points: 7765
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 190 clutch problems
Posted: 26 Mar 2011 at 9:46pm |
|
Is my clutch going out? The gears want to grind when shifting from neutral (not gear to gear)....I have been able to put it into first without too much grinding, if I have a pto implement hooked up I can put the pto in gear and eliminate the problem. I don't have a slipping problem. Is there some kind of tranny brake on these??
|
|
ALLIS EXPRESS!
This year:
|
 |
|
Sponsored Links
|
|
|
Chalmersbob
Orange Level
Joined: 11 Sep 2009
Location: Pennsylvania
Points: 2122
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Mar 2011 at 9:53pm |
Eldon It sounds like there is oil getting on the clutch and it doesn't disengage completly unless there is a load (pto) on it. Mt 1 B I have to wait before I can put it into gear.
Bob
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21062
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Mar 2011 at 10:25pm |
|
Bad pilot brg or more likely, clutch springs falling out of the dampner in the middle of the clutch disc.
|
|
Eldon (WA)
Orange Level
Joined: 11 Sep 2009
Location: Spokane, WA
Points: 7765
|
Post Options
Thanks(0)
Quote Reply
Posted: 26 Mar 2011 at 10:33pm |
|
Could it be a problem from sitting over winter? When I bought the tractor 3 years ago the seller included a new clutch and throwout bearing. Said they thought the clutch was going, but hadn't had to replace. I'm wondering if this might be an intermittant problem....I sure hope so cause I don't have time to do a split.....
|
|
ALLIS EXPRESS!
This year:
|
|
darrel in ND
Orange Level
Joined: 22 Nov 2009
Location: Hebron, ND
Points: 8672
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Mar 2011 at 1:10pm |
|
Eldon, how much "free travel" does your clutch pedal have? Darrel
|
|
Orange Blood
Orange Level
Joined: 29 Nov 2010
Location: ColoradoSprings
Points: 4053
|
Post Options
Thanks(0)
Quote Reply
Posted: 27 Mar 2011 at 3:13pm |
an "in the meantime" remedy would be to shut the tractor off, when putting it into gear the first time, start it after it is in gear, and the clutch is pressed, it will be a little more wear on the starter, but that is easily fixed, until you have time to spilt it correctly. Of course all the safety stuff goes here......> ALWAYS be in the seat.
|
|
Still in use:
HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060
Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7
|
|
Steve M C/IL
Orange Level
Joined: 01 Jul 2010
Location: shelbyville IL
Points: 691
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Mar 2011 at 5:20am |
|
Pilot brg on my 220 was stuck and caused similar results.
|
|
Eldon (WA)
Orange Level
Joined: 11 Sep 2009
Location: Spokane, WA
Points: 7765
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Apr 2011 at 11:34pm |
|
Fired up the 190 today (been sitting a couple of weeks) and the problem was the opposite. I had to let the clutch out a bit to get it in gear. Weird.....
|
|
ALLIS EXPRESS!
This year:
|
|
DaveCinIN
Orange Level
Joined: 12 Sep 2009
Location: Kouts, IN
Points: 629
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Apr 2011 at 9:49pm |
|
I usually have to let the clutch out some to put mine in gear. If i shift with it not at a complete stop it goes right into gear.
|
|
