WD / WD45 Drawbar Guide Assy. Photos

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   I bought a nice original drawbar guide assembly P/N 223187 to replace the repaired one on my WD45 at the salvage yard some time ago. That part number is for a WD while P/N 226522 is for the WD45. Difference being the mounting holes are cut out on the one for the 45 so you can just slide it onto the tractor and install the pins.  The one for the WD does not have the holes cut out/open. My intention was to cut out the holes on the one I bought. All of the reproduction drawbar guides I've seen have the open holes, which I know would be easier to use. But that got me to thinking maybe someone would want this guide I have if they're doing a restoration and want it to be correct for a WD. Just thought I'd throw it out there before I cut the holes out. I'd still need one for my 45 though, so I'd be open to an even swap if anyone is interested.

Edited by JimWenigOH - 20 Dec 2022 at 8:09pm

	This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity.
	The Forum	Parts and Services	Unofficial Allis Store	Tractor Shows	Serial Numbers	History

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
JimWenigOH Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: NC Ohio Points: 1153	Post Options Post Reply Quote JimWenigOH Report Post Thanks(0) Quote Reply Topic: WD / WD45 Drawbar Guide Assy. Photos Posted: 18 Dec 2022 at 4:08pm
	I bought a nice original drawbar guide assembly P/N 223187 to replace the repaired one on my WD45 at the salvage yard some time ago. That part number is for a WD while P/N 226522 is for the WD45. Difference being the mounting holes are cut out on the one for the 45 so you can just slide it onto the tractor and install the pins. The one for the WD does not have the holes cut out/open. My intention was to cut out the holes on the one I bought. All of the reproduction drawbar guides I've seen have the open holes, which I know would be easier to use. But that got me to thinking maybe someone would want this guide I have if they're doing a restoration and want it to be correct for a WD. Just thought I'd throw it out there before I cut the holes out. I'd still need one for my 45 though, so I'd be open to an even swap if anyone is interested. Edited by JimWenigOH - 20 Dec 2022 at 8:09pm

Sponsored Links

DrAllis Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Access Joined: 12 Sep 2009 Points: 20187	Post Options Post Reply Quote DrAllis Report Post Thanks(0) Quote Reply Posted: 18 Dec 2022 at 4:52pm
	My 1957 WD-45 is the same way. It never had a snap-coupler bell, as it was ordered without it( factory delete). So, when I use my 3 x 16's 70 series or 2 x 14's 50 series mounted plows, I split the drawbar and set them off to the side. I then swing the bail clear up against the platform and leave it there. Splitting the drawbar is much easier on the back !!

IBWD MIke Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 08 Apr 2012 Location: Newton Ia. Points: 3642	Post Options Post Reply Quote IBWD MIke Report Post Thanks(0) Quote Reply Posted: 19 Dec 2022 at 1:45pm
	Needed one of those for a project I was working on some time back. Then got a No.4 sub-sioler and that project got shelved. Good ones are hard to find!

JimWenigOH Members Profile Send Private Message Find Members Posts Add to Buddy List Orange Level Joined: 12 Sep 2009 Location: NC Ohio Points: 1153	Post Options Post Reply Quote JimWenigOH Report Post Thanks(0) Quote Reply Posted: 20 Dec 2022 at 8:08pm
	Photo to compare the two. If you have a good used guide with open slots (WD45) and would like to trade for one with holes (WD) let me know.