| Author |
 Topic Search  Topic Options
|
185turbo 
Bronze Level
Joined: 15 Aug 2018
Location: Kansas
Points: 104
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 8010 lights
Posted: 08 Jan 2021 at 1:11pm |
|
8010 is having trouble with the lights. I put all 8 lights on new.
1. When the switch is turned to hazards the hazards come on and flash but when you turn the turn signals on the side that is supposed to flash goes out and the other stays solid .
2. When the switch is turned to the road lights NO lights come on and the hazards will work like above.
3. When the switch is turned to flood lights all the lights come on
My question is why the road lights position will not turn on any lights and why when the flashers are on the the turn signal will not work right?
Thanks
|
|
185 turbocharged w/ 500 loader , WD
|
 |
|
Sponsored Links
|
|
|
orangereborn
Orange Level
Joined: 12 Sep 2009
Location: NW WI
Points: 1437
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jan 2021 at 2:35pm |
|
were your road lites HI/Lo and you replace them with the single filament??
|
|
185turbo
Bronze Level
Joined: 15 Aug 2018
Location: Kansas
Points: 104
|
Post Options
Thanks(0)
Quote Reply
Posted: 08 Jan 2021 at 7:59pm |
|
No i replaced them with single filament lights.
|
|
185 turbocharged w/ 500 loader , WD
|
|
KJCHRIS
Orange Level
Joined: 21 Dec 2015
Location: WC Iowa
Points: 899
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Jan 2021 at 12:49am |
|
Did lights work correctly before you replaced them?
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
185turbo
Bronze Level
Joined: 15 Aug 2018
Location: Kansas
Points: 104
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Jan 2021 at 11:22am |
|
Yes just put new ones on
|
|
185 turbocharged w/ 500 loader , WD
|
|
Ron(AB)
Orange Level
Joined: 27 Dec 2009
Location: Alberta
Points: 958
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Jan 2021 at 2:19pm |
|
There is an updated flasher switch for the 8000 series.
Have you installed it yet?
That will make your flashers work.
Re: the driving lights, you need dual beam lights for them to work in both positions.
|
|
405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk
|
|
185turbo
Bronze Level
Joined: 15 Aug 2018
Location: Kansas
Points: 104
|
Post Options
Thanks(0)
Quote Reply
Posted: 10 Jan 2021 at 10:01am |
|
Ok i will get the new flasher switch thanks
|
|
185 turbocharged w/ 500 loader , WD
|
|
