Print Page | Close Window

8010 lights

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177378
Printed Date: 25 Sep 2024 at 10:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 8010 lights
Posted By: 185turbo
Subject: 8010 lights
Date Posted: 08 Jan 2021 at 1:11pm
8010 is having trouble with the lights. I put all 8 lights on new.

1. When the switch is turned to hazards the hazards come on and flash but when you turn the turn signals on the side that is supposed to flash goes out and the other stays solid .
2. When the switch is turned to the road lights NO lights come on and the hazards will work like above.
3. When the switch is turned to flood lights all the lights come on

My question is why the road lights position will not turn on any lights and why when the flashers are on the the turn signal will not work right?
Thanks




-------------
185 turbocharged w/ 500 loader , WD



Replies:
Posted By: orangereborn
Date Posted: 08 Jan 2021 at 2:35pm
were your road lites HI/Lo and you replace them with the single filament??


Posted By: 185turbo
Date Posted: 08 Jan 2021 at 7:59pm
No i replaced them with single filament lights.

-------------
185 turbocharged w/ 500 loader , WD


Posted By: KJCHRIS
Date Posted: 09 Jan 2021 at 12:49am
Did lights work correctly before you replaced them? 

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,


Posted By: 185turbo
Date Posted: 09 Jan 2021 at 11:22am
Yes just put new ones on

-------------
185 turbocharged w/ 500 loader , WD


Posted By: Ron(AB)
Date Posted: 09 Jan 2021 at 2:19pm
There is an updated flasher switch for the 8000 series.

Have you installed it yet?

That will make your flashers work.

Re: the driving lights, you need dual beam lights for them to work in both positions.

-------------
405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk


Posted By: 185turbo
Date Posted: 10 Jan 2021 at 10:01am
Ok i will get the new flasher switch thanks

-------------
185 turbocharged w/ 500 loader , WD



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net