This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | ||||||
The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History |
anybody have a rule of thumb |
Post Reply |
Author | |
LouSWPA
Orange Level Access Joined: 11 Sep 2009 Location: Clinton, Pa Points: 24272 |
Post Options
Thanks(0)
Posted: 11 Nov 2024 at 2:05pm |
for required HP for a given hydraulic pump?
For instance, what would a 2500psi 12gal/min pump require? Edited by LouSWPA - 11 Nov 2024 at 2:06pm |
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living. Wait for the Lord; be strong and take heart and wait for the Lord. Ps 27 |
|
Sponsored Links | |
DiyDave
Orange Level Access Joined: 11 Sep 2009 Location: Gambrills, MD Points: 51701 |
Post Options
Thanks(0)
|
http://www.metaris.com/hp-calculator.php
17.503 per the above calculator... Edited by DiyDave - 11 Nov 2024 at 3:19pm |
|
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
|
LouSWPA
Orange Level Access Joined: 11 Sep 2009 Location: Clinton, Pa Points: 24272 |
Post Options
Thanks(0)
|
|
|
I am still confident of this;
I will see the goodness of the Lord in the land of the living. Wait for the Lord; be strong and take heart and wait for the Lord. Ps 27 |
|
SteveM C/IL
Orange Level Access Joined: 12 Sep 2009 Location: Shelbyville IL Points: 8241 |
Post Options
Thanks(0)
|
Upsize Lou. Need 50 horse
|
|
jaybmiller
Orange Level Access Joined: 12 Sep 2009 Location: Greensville,Ont Points: 22472 |
Post Options
Thanks(0)
|
ROT...... you'll need 7 more HP than you've got
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
KJCHRIS
Orange Level Joined: 21 Dec 2015 Location: WC Iowa Points: 908 |
Post Options
Thanks(0)
|
Not sure what hydraulic suppliers still have charts for that kind of thing. a decade ago Baum Hydraulics , Omaha, Ne. had a chart in their catalog online. Listed gear, vane, piston/ open & closed center pumps. I'm sure there's still a company with a similar online chart. They also had chart showing how much PSI and piston diameter of cylinder to lift "X" pounds.
|
|
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,
|
|
DrAllis
Orange Level Access Joined: 12 Sep 2009 Points: 20522 |
Post Options
Thanks(0)
|
When would a hydraulic system ever be operated at full 2500 psi continuously ?? A series four D-17 hydraulic system not doing any work and engine running wide open throttle takes less than 1 HP to circulate 12 GPM of oil at 100 psi. When you hit the end of a hydraulic cylinders stroke and don't let the hyd lever cancel to HOLD, the relief valve opens (2,200 psi takes 15 HP) and then makes the engine labor. So it's only a momentary 15 HP load.
|
|
Clay
Orange Level Joined: 11 Sep 2009 Location: Udall, Kansas Points: 9334 |
Post Options
Thanks(0)
|
0.06 x Horse Power = GPH [approximately]
Edited by Clay - 12 Nov 2024 at 9:44pm |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |