Print Page | Close Window

anybody have a rule of thumb

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204119
Printed Date: 22 Nov 2024 at 7:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: anybody have a rule of thumb
Posted By: LouSWPA
Subject: anybody have a rule of thumb
Date Posted: 11 Nov 2024 at 2:05pm
for required HP for a given hydraulic pump?

For instance, what would a 2500psi 12gal/min pump require?


-------------
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27



Replies:
Posted By: DiyDave
Date Posted: 11 Nov 2024 at 3:18pm
http://www.metaris.com/hp-calculator.php" rel="nofollow - http://www.metaris.com/hp-calculator.php

17.503 per the above calculator...Wink


-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!


Posted By: LouSWPA
Date Posted: 11 Nov 2024 at 4:49pm
Originally posted by DiyDave DiyDave wrote:

http://www.metaris.com/hp-calculator.php" rel="nofollow - http://www.metaris.com/hp-calculator.php

17.503 per the above calculator...Wink


Thanks Dave!


-------------
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27


Posted By: SteveM C/IL
Date Posted: 12 Nov 2024 at 11:02am
Upsize Lou. Need 50 horse


Posted By: jaybmiller
Date Posted: 12 Nov 2024 at 11:44am
ROT......  you'll need 7 more HP than you've got Wink


-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water


Posted By: KJCHRIS
Date Posted: 12 Nov 2024 at 7:41pm
Not sure what hydraulic suppliers still have charts for that kind of thing. a decade ago Baum Hydraulics , Omaha, Ne. had a chart in their catalog online. Listed gear, vane, piston/ open & closed center pumps. I'm sure there's still a company with a similar online chart. They also had chart showing how much PSI and piston diameter of cylinder to lift "X" pounds. 

-------------
AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B,


Posted By: DrAllis
Date Posted: 12 Nov 2024 at 9:27pm
When would a hydraulic system ever be operated at full 2500 psi continuously ??  A series four D-17 hydraulic system not doing any work and engine running wide open throttle takes less than 1 HP to circulate 12 GPM of oil at 100 psi.   When you hit the end of a hydraulic cylinders stroke and don't let the hyd lever cancel to HOLD, the relief valve opens (2,200 psi takes 15 HP) and then makes the engine labor. So it's only a momentary 15 HP load.


Posted By: Clay
Date Posted: 12 Nov 2024 at 9:41pm
0.06 x Horse Power = GPH     [approximately]



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net