| Author |
|
JW in MO 
Orange Level
Joined: 16 Feb 2010
Location: South KC Area
Points: 2626
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: New Year, New Project
Posted: 26 Apr 2023 at 9:07pm |
|
Replaced both head gaskets, one was bad and the other for good measure. Three attempts to drive around the block have resulted in three humiliating tows back to the house. The tires are so hard they won't go flat, however they are flat on one side and the bouncing has limited me to second gear, just above an idle. Gas tank is having to come out , something keeps blocking the outlet. Got to order tires next, I thought they were expensive, 6 @ $335 each and tubes at $46.25 each, and I haven't been told how much the new kitchen countertop cost, nor am I going to ask.
|
|
Maximum use of available resources!
|
 |
|
Sponsored Links
|
|
|
AC7060IL
Orange Level
Joined: 19 Aug 2012
Location: central IL
Points: 3353
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Feb 2023 at 9:10am |
 JW in MO wrote:
The old girl runs as of today. New plugs, plug wires, 2 new inner and 2 new outer distributor caps, a little gasoline down the carb and she came to life. Mice took the stuffing out of the driver side of the seat and deposited it inside the muffler, the first pop blew that out and she purrs like a kitten. Posted a short video on Facebook, now I need a get a second job cause I got a sneakin feelin this is gonna cost me. The truck is one thing but this will probably add up to new curtains, furniture or whatever else will even out the spending.
|
congratulations! Very cool truck project. Cost appreciation~ spoken honesty.
|
|
JW in MO
Orange Level
Joined: 16 Feb 2010
Location: South KC Area
Points: 2626
|
Post Options
Thanks(1)
Quote Reply
Posted: 27 Feb 2023 at 6:51pm |
|
The old girl runs as of today. New plugs, plug wires, 2 new inner and 2 new outer distributor caps, a little gasoline down the carb and she came to life. Mice took the stuffing out of the driver side of the seat and deposited it inside the muffler, the first pop blew that out and she purrs like a kitten. Posted a short video on Facebook, now I need a get a second job cause I got a sneakin feelin this is gonna cost me. The truck is one thing but this will probably add up to new curtains, furniture or whatever else will even out the spending.
|
|
Maximum use of available resources!
|
|
plummerscarin
Orange Level Access
Joined: 22 Jun 2015
Location: ia
Points: 3533
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2023 at 11:22am |
DMiller wrote:
Have been scouring for a decently barn kept older medium duty truck, to transfer the running gear from under my F250SD as it is corrupting so fast. Scary how expensive Barn Finds can get. |
Barn finds are all the rage these days as evidence by all the YouTube videos out there. Have inflated prices beyond reason. For buyers anyway.
|
|
sparky
Orange Level Access
Joined: 13 May 2011
Location: So. Indiana
Points: 1559
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2023 at 7:40am |
|
Nice find! I love the look of those old gauges.
|
|
It's the color tractor my grandpa had!
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 31363
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Jan 2023 at 7:24am |
|
Have been scouring for a decently barn kept older medium duty truck, to transfer the running gear from under my F250SD as it is corrupting so fast. Scary how expensive Barn Finds can get.
|
|
Tracy Martin TN
Orange Level Access
Joined: 11 Sep 2009
Location: Gallatin,TN
Points: 10640
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2023 at 6:53pm |
|
Nice old truck, I have a friend here in Gallatin that has one similar. The hoist on them are very unique, gear driven. Keep it original, you won't regret it! Tracy
|
|
No greater gift than healthy grandkids!
|
|
Sugarmaker
Orange Level
Joined: 12 Jul 2013
Location: Albion PA
Points: 8311
|
Post Options
Thanks(0)
Quote Reply
Posted: 28 Jan 2023 at 5:41pm |
JM, Any updates on the Old Ford truck? Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Sugarmaker
Orange Level
Joined: 12 Jul 2013
Location: Albion PA
Points: 8311
|
Post Options
Thanks(0)
Quote Reply
Posted: 15 Jan 2023 at 10:00am |
JM, Sure hope you keep this truck close to original! Love the truck! Whats the next steps? I have several sources for parts that I have used. Most are pretty good folks to work with. Yuor flat head V8 should be able to be brought back to life, unless it has internal cracks in water jacket. Just takes time and money. I have been trying to make a little headway on mine each week during the winter. Have a horn problem next. Maybe will see you over on the Ford Barn Forum? Are you the guy that has all the OLD Allis tractors and does videos of the restorations? Regards, Chris
Edited by Sugarmaker - 15 Jan 2023 at 10:03am
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Unit3
Orange Level
Joined: 17 Oct 2009
Location: NC Iowa
Points: 5547
|
Post Options
Thanks(0)
Quote Reply
Posted: 13 Jan 2023 at 8:10am |
And your winner for the Coolest Project in 2023 is (drum roll ----------------------------------------------------------------) JW from Missouri with his 1935 Ford truck!!!
Edited by Unit3 - 13 Jan 2023 at 8:10am
|
|
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
|
JW in MO
Orange Level
Joined: 16 Feb 2010
Location: South KC Area
Points: 2626
|
Post Options
Thanks(0)
Quote Reply
Posted: 11 Jan 2023 at 8:50pm |
Fred in Pa wrote:
Did I read somewhere ?? the only way to make a Ford run is to jam a Cummins in it . LMAO |
Don’t leave old Red sitting unprotected, if the flathead doesn’t work, that 7.3 would make a nice power plant!
|
|
Maximum use of available resources!
|
|
Fred in Pa
Orange Level
Joined: 13 Sep 2009
Location: Hanover Pa.
Points: 9210
|
Post Options
Thanks(0)
Quote Reply
Posted: 09 Jan 2023 at 4:37pm |
|
Did I read somewhere ?? the only way to make a Ford run is to jam a Cummins in it . LMAO
|
|
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
|
JW in MO
Orange Level
Joined: 16 Feb 2010
Location: South KC Area
Points: 2626
|
Post Options
Thanks(0)
Quote Reply
Posted: 07 Jan 2023 at 2:46pm |
Today I set out to clean and set the points, gasket all but missing for the coil. Everything checked out OK, made a gasket and ready to reinstall. First gasket I’ve knocked out in years, taught my daughter and she was hammering out WC carburetor gaskets from age 10 but she up and grew up, moved out and got married so I’m back to making my own.  ![]()
|
|
Maximum use of available resources!
|
|
Steve in NJ
Orange Level Access
Joined: 12 Sep 2009
Location: Andover, NJ
Points: 11852
|
Post Options
Thanks(0)
Quote Reply
Posted: 06 Jan 2023 at 9:03pm |
Yeah, I'd be hotroddin' it to. But.. I'm a hotrodder by heart. For a 1 1/2 ton truck, that thing is in beeeutiful shape! Let's see... small block Ford w/AOD trans would fit nice in there.  I had a 400 sbc w/350 Turbo in my 30 Model AA many years ago. I had upgraded to the same motor wheels that are on your truck. Gotta' be careful around them split rims man! Whew! They're dangerous fir' sure! I love the look of those wheels though. My AA had the 28-29 closed cab on it with 30 fenders, short dove tail running boards and dual wheels. It was considered an early 30. Ole' Henry was mix matchin' parts to make the commercial trucks before the new round cabs came out. Using the old stuff up he was.... Steve@B&B
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
FloydKS
Orange Level
Joined: 12 Sep 2009
Location: S E Kansas
Points: 8155
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Jan 2023 at 9:59am |
|
I agree with Dave and Tbone... it is your truck, enjoy... decide as you move forward.
|
|
Holding a grudge is like taking poison and expecting the other person to die
|
|
Tbone95
Orange Level Access
Joined: 31 Aug 2012
Location: Michigan
Points: 11636
|
Post Options
Thanks(1)
Quote Reply
Posted: 04 Jan 2023 at 6:22am |
Very cool!
I like Dave Kamp's idea, keep it looking old, but great. Whatever you choose, enjoy, that's a neat truck.
|
|
shameless dude
Orange Level
Joined: 10 Apr 2017
Location: east NE
Points: 13607
|
Post Options
Thanks(0)
Quote Reply
Posted: 04 Jan 2023 at 1:14am |
|
yep....rat rod it!
|
|
DaveKamp
Orange Level Access
Joined: 12 Apr 2010
Location: LeClaire, Ia
Points: 5793
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Jan 2023 at 9:21pm |
Wow... that truck is so complete, and in such good condition, that I would just get it running and operational, clean it up good, and give it a coat of protective wax... they are only 'original condition' once... Save the restorations for the ones that can't be kept original (i.e. ones that've been through a prior resto that wasn't-so-great), and save the 'rat rod' circumstance for using a chassis that's too-far-gone to use as original or resto, a body that's more gone-than-there, etc... Keep the original drivetrain... everybody builds rat-rods using cliche crap.
As for wheels and tires, I would have a set of custom-made 19.5 wheels (Stockton Wheel, or someone like that) to bolt on to the existing hubs... go through the brakes thoroughly, make it safe to drive.
|
|
Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.
|
|
JW in MO
Orange Level
Joined: 16 Feb 2010
Location: South KC Area
Points: 2626
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Jan 2023 at 7:25pm |
Lots of little issues will need to be addressed but all in all, it's in pretty good shape, no rust holes anywhere, even has the original floor board. Yes, it's a flathead V8 but not sure which model yet. Of course they make the tires, at 350 a pop. I don't want to change the axles unless I absolutely have to but brake issues may make me rethink that. If the motor or transmission turn out to be junk then it will get all different undercarriage but the plan for now is to keep it as original as possible. The 18.5 conversion sounds intriguing, I'd like some more information.
|
|
Maximum use of available resources!
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 31363
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Jan 2023 at 11:24am |
|
Only GOOD Option is conversion to 18.5 or other Budd Style rims.
|
|
Clay
Orange Level
Joined: 11 Sep 2009
Location: Udall, Kansas
Points: 9397
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Jan 2023 at 10:01am |
Make sure you are able to find the right size tires. I have a 1954 Ford F-500. Next impossible to find 7.50/20 or 8.25/20 truck tires.
|
|
KMAG
Orange Level Access
Joined: 26 May 2020
Location: Elizabethtown,
Points: 671
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Jan 2023 at 8:26am |
|
Be care of rims if split rims (widow makers) and not lock ring rims.
|
|
Fred in Pa
Orange Level
Joined: 13 Sep 2009
Location: Hanover Pa.
Points: 9210
|
Post Options
Thanks(0)
Quote Reply
Posted: 03 Jan 2023 at 7:30am |
|
That is a cool looking front end
|
|
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
|
DMiller
Orange Level Access
Joined: 14 Sep 2009
Location: Hermann, Mo
Points: 31363
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2023 at 5:32pm |
|
Really nice shape!!
|
|
DanWi
Orange Level Access
Joined: 18 Sep 2009
Location: wttn
Points: 1810
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2023 at 5:03pm |
|
What motor is in a truck like that? Flathead V8?
|
|
JW in MO
Orange Level
Joined: 16 Feb 2010
Location: South KC Area
Points: 2626
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2023 at 2:04pm |
Been looking for a 37 to put in the line-up with my 37 WC, U and A but
this came up I had to give it a look. Attempting to put her back as
original as possible, ignition/steering lock missing but switch and all
work. Thanks Sugrarmaker, will take advantage of the group and always
up for a good read. I also got a Ford flat bed in the deal but haven't
made up my mind yet, would have to widen it by 5-1/2" but then fashion
the hoist system. She's got 20", five bolt wheels and all 4 hub caps
are there and decent shape.
|
|
Maximum use of available resources!
|
|
tadams(OH)
Orange Level Access
Joined: 17 Sep 2009
Location: Jeromesville, O
Points: 10226
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2023 at 1:40pm |
I would do a complete original restore on that beautiful looking ole truck
|
|
DougG
Orange Level
Joined: 20 Sep 2009
Location: Mo
Points: 8124
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2023 at 12:29pm |
|
Very nice ! Id drop an Allis 426 in it, make a Ratrod ! But thats me
|
|
Sugarmaker
Orange Level
Joined: 12 Jul 2013
Location: Albion PA
Points: 8311
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2023 at 10:32am |
JW, WOW! I really like it! I would also invite you to join the Ford Barn Forum. I have had a great success with help on my ragged ol truck from that site. (I am there with same handle) I like the looks of your truck! There is a new book on 35-36 Ford big trucks coming out soon too, semi-sponsored by Early Ford V8 Club. Your dash looks great! What are your plans and what is some of the back story on your awesome big truck? What size tires will you be looking for? Regards, Chris
|
|
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
|
Alberta Phil
Orange Level
Joined: 13 Sep 2009
Location: Alberta, Canada
Points: 3806
|
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jan 2023 at 10:06am |
|
Very nice truck!! I've always liked the old Fords.
|
|
Topic Options
