| Author |
 Topic Search  Topic Options
|
Dusty MI 
Orange Level
Joined: 13 Sep 2009
Location: Charlotte, Mi
Points: 5058
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: 720 steering
Posted: 21 Sep 2015 at 7:05pm |
Had something strange today. I have a 720 with a loader, my wife and I loaded four 8 ft. tables and some folding chairs on the loader, I have a couple of heavy angle irons on the bucket that I use to move brush with when trimming trees. We got the tables and chairs loaded at the garage and I was going to move them to the basement, but as I started to move the 720 it suddenly would not steer, the steering wheel would turn but the front wheels would not turn they just stayed in the direction they were in. The steering has not been loose and sloppy. Has anyone had this happen? I wonder if maybe a pin somewhere could have sheared?
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
 |
|
Sponsored Links
|
|
|
den/southern illinoi
Orange Level
Joined: 11 Sep 2009
Location: Sparta, Illinoi
Points: 1988
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Sep 2015 at 7:35pm |
|
Is the bolt still in the steering wheel where it goes on the shaft...right above the controls. Don't ask me why I ask this. LOL Den
|
|
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
|
Dusty MI
Orange Level
Joined: 13 Sep 2009
Location: Charlotte, Mi
Points: 5058
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Sep 2015 at 7:41pm |
I should have said that the steering shaft turns all the way down to the steering gear box. I did not check if the shaft going into the gear box is turning.
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
Tracy Martin TN
Orange Level Access
Joined: 11 Sep 2009
Location: Gallatin,TN
Points: 10633
|
Post Options
Thanks(0)
Quote Reply
Posted: 21 Sep 2015 at 9:27pm |
|
Dusty, looks like in manual the universal joint attaches to gearbox. It would either be splined, keyed or bolted. It really doesn't show. I think the steering box is the same as a Chevy Vega, not sure though. They seem to be a pretty tough setup. Loader has probably put stress on it, but I would have thought looseness showing up before complete failure. JMHO Tracy
|
|
No greater gift than healthy grandkids!
|
|
Dusty MI
Orange Level
Joined: 13 Sep 2009
Location: Charlotte, Mi
Points: 5058
|
Post Options
Thanks(0)
Quote Reply
Posted: 22 Sep 2015 at 6:52pm |
I ordered a new one off e-bay $114. Looking at my service manual, it's a strange looking system. I read is several places that is is the same as the Vega. And all the pictures look like it. Could have ordered one for power steering, would have been nice with the loader, but I don't know what else it would take to make it work. And don't have time right now to make it work.
Dusty
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
Steve in NJ
Orange Level Access
Joined: 12 Sep 2009
Location: Andover, NJ
Points: 11823
|
Post Options
Thanks(0)
Quote Reply
Posted: 23 Sep 2015 at 6:16am |
|
I thought the same when I first removed the box outta' my 620. Looked just like a Vega box like Tracy said in shape and bolt splay. Used many Vega boxes in my hotrods with cross steer steering and a tube axle.
|
|
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
|
tadams(OH)
Orange Level Access
Joined: 17 Sep 2009
Location: Jeromesville, O
Points: 10135
|
Post Options
Thanks(0)
Quote Reply
Posted: 25 Sep 2015 at 10:41am |
Over on the SimplicityAC site there is instruction on installing the power steering box. Tom
|
|
