![]() |
This site is not affiliated with AGCO Inc., Duluth GA., Allis-Chalmers Co., Milwaukee, WI., or any surviving or related corporate entity. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an un-moderated public forum with no responsibility for its accuracy or usability assumed by the users and sponsors of this site or any corporate entity. | |||||
| The Forum | Parts and Services | Unofficial Allis Store | Tractor Shows | Serial Numbers | History | |
Show tractors |
Post Reply
|
| Author | |
Acmichael
Silver Level
Joined: 07 Dec 2014 Location: Hartselle Al Points: 80 |
Post Options
Thanks(0)
Quote Reply
Topic: Show tractorsPosted: 16 Dec 2016 at 5:05pm |
|
I see a lot of tractors being restored on here. How many of y'all take them to tractor shows, parades etc or do you work with them? Also for the ones that do the show route do you put implements on them. Reason I ask is I have cultivators and mid mount planters for my c have thought about putting those on. I have only seen one pic on the Internet and none in person with that set up. Thinking might be something different
|
|
![]() |
|
| Sponsored Links | |
![]() |
|
Crewchief
Orange Level Access
Joined: 28 Oct 2012 Location: GraniteFalls,NC Points: 615 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 5:18pm |
|
Our little B had lived a long hard life b 4 I brought it home.In it's "retirement" life,I take it to a few shows,,"but" it's new job is helping throw out candy at Christmas Parades.
|
|
|
1952 B 1950 Ferguson TO-2O
|
|
![]() |
|
HudCo
Orange Level
Joined: 29 Jan 2013 Location: Plymouth Utah Points: 3946 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 5:40pm |
|
really like seeing the implements mounted on at shows also like them both (trailer queens and working tractors ). mine are working tractors in very nice shape i take them to shows and parades
|
|
![]() |
|
Jacob (WI,ND)
Orange Level
Joined: 11 Sep 2009 Location: Kenmare, ND Points: 1248 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 6:21pm |
|
No doubt putting any implements on a tractor will get more attention. Not that the tractor might not be done very well, or a very nice original, but once you have seen a few hundred B's or C's or whatever the common tractor might be, they all start to look the same. In my opinion the only way to get away from that is to have something different on it for people to look at.
I try to have something on my C when I bring it somewhere, usually my attached plow just stays on it. And usually people are looking at that because it may be the only C with a plow at that show. I know I am drawn to attachments, like you said, they aren't as commonly seen at shows.
|
|
|
Jacob Swanson
1920 6-12; 1925,1926 20-35 longfenders; 1925,1926 15-25's; 1927,1929 20-35 shortfenders; C; B's; IB; WC's; WD; WD45 |
|
![]() |
|
jaybmiller
Orange Level Access
Joined: 12 Sep 2009 Location: Greensville,Ont Points: 24775 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 6:39pm |
|
I guessing that 99% of the 'restored trailer queens' never ,ever go into a field. It's too purdy for that, think of the hours just to clean a bit of mud off( HD syndrome).
Having implements hung onto a tractor SHOWS what it was USED for,hopefully inspire others to save old iron..... Yup, NONE of my D-14s will ever win a ribbon,but they do get used every once in awhile. Jay |
|
|
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
|
![]() |
|
Alberta Phil
Orange Level
Joined: 13 Sep 2009 Location: Alberta, Canada Points: 3937 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 6:51pm |
|
Most of mine are unrestored, but those that have complete restorations still get to occasionally go out and do what they were made for.
|
|
![]() |
|
Acmichael
Silver Level
Joined: 07 Dec 2014 Location: Hartselle Al Points: 80 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 9:17pm |
|
I figure the 1948 I restored had worked enough. So its retired. Just parades and shows. Not going to win any ribbons either not why I restored it to begin with. Been in family since it was new.
|
|
![]() |
|
Rog(NCWI)
Orange Level
Joined: 12 Sep 2009 Location: Aniwa.WI Points: 243 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 9:49pm |
|
My 39 B is retired. Only goes to a show and 1 parade a year. May take it for a Sunday drive once in a while. I restored a 51 WD and sold it to a person which is going to use it. I had a 37 WF and a Model C which I sold to a museum which I restored also. My other B and CA are unrestored and are my working tractors along with a 860 Ford.
|
|
![]() |
|
CrestonM
Orange Level
Joined: 08 Sep 2014 Location: Oklahoma Points: 8457 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 10:33pm |
|
My restored tractors are...well....working tractors. I do try to keep them nice, but if they get a scratch, well...it's not the end of the world. I put "workability" before looks, but like I say, I do try to keep them nice. Every now and then I'll wash up the B or 8N and take them to a show.
And yes, I prefer having an implement on the tractor at a show. I have a sicklemower on my B all the time.
|
|
![]() |
|
shameless (ne)
Orange Level
Joined: 08 Jul 2016 Location: nebraska Points: 7463 |
Post Options
Thanks(0)
Quote Reply
Posted: 16 Dec 2016 at 11:52pm |
|
I can help you repair them paint scratches!
|
|
![]() |
|
Calvin Schmidt
Orange Level
Joined: 11 Sep 2009 Location: Ontario Can. Points: 4555 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2016 at 4:51am |
|
I have nice original and restored tractors. I don't get to as many shows to show tractors as I used to. All get used if I can find enough jobs. My first choice is a nice original tractor, second choice is a tractor restored to how it came from West Allis and with just a little wear. Over restored tractors become trailer queens. My fully restored D-21 has cultivated more than 1000 acres. That's what it was built to do. Same goes for my old cars. Implements do add a lot to a tractor and gets my attention.
|
|
|
Nothing is impossible if it is properly financed
|
|
![]() |
|
JW in MO
Orange Level
Joined: 16 Feb 2010 Location: South KC Area Points: 2670 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2016 at 8:20am |
|
An implement on a tractor will draw more attention at shows. As for trailer queens, I bought a Farmall MD that someone tried to make a trailer queen out of, however, those tractors don't take well to retirement. It was pouring out white smoke and wouldn't hardly pull itself up on a trailer. I put it on disk and after 6 or 7 hours of working her hard the white smoke quit and she's back to normal.
|
|
|
Maximum use of available resources!
|
|
![]() |
|
DSeries4
Orange Level
Joined: 12 Sep 2009 Location: Ontario, Canada Points: 7533 |
Post Options
Thanks(0)
Quote Reply
Posted: 17 Dec 2016 at 9:19am |
I guess I am part of the 1% here. The tractors that I have restored do get used occasionally for work on the farm. Mostly chore jobs like running a rotary mower, cultivating, clearing out fence rows and brush. However, I am always careful to make sure I do not get anything scratched too bad. Only around the drawbar and 3 point is acceptable to me. Also, my tractors rarely get put on a trailer. It's much more fun to drive them to a show. People always look at you when they see you coming down the road. I do have some AC implements, but really should try to get more of them. It would be nice to have a different piece for each tractor. |
|
|
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
|
![]() |
|
Dave in il
Orange Level
Joined: 22 Sep 2009 Location: Manville Il Points: 1748 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Dec 2016 at 3:41pm |
|
I got the idea that each of my "collected" tractors should have a plow. I collect tractors with 201 & 226 gas and so far I have a 2 bottom IH on steel for my unstyled WC, a 2 bottom IH on rubber for my styled WC. For my WD my I have a model 53 pin hitch, plus a WD pick up plow and a two bottom #2 on steel with hydraulic lift. I have a 63 snap coupler for my WD45 or one of the D17s and a snap coupler 74 and an IH model 60 3-16 for the D17's and 3 bottom 2000 series semi mount for the series IV D17 and a 4 bottom 9000 series for the D19 diesel.
That's a lot of plows considering we no till or minimum till our farm ground. lol This fall we had a plow day and I brought two tractors and 6 plows! |
|
|
AGCO My Allis Gleaner Company
|
|
![]() |
|
Dusty MI
Orange Level
Joined: 13 Sep 2009 Location: Charlotte, Mi Points: 5060 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Dec 2016 at 7:06pm |
|
I like to drive my D-10 in caravans to GOTO Shows.
And I use it some around our place. The GOTO in Michigan is about 60 miles from our place. I'm thinking of driving my D-10 from our place to there. Anyone that would like to join me is welcome. Dusty
|
|
|
917 H, '48 G, '65 D-10 series III "Allis Express"
|
|
![]() |
|
jiminnd
Orange Level
Joined: 16 Sep 2009 Location: Rutland ND Points: 2307 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Dec 2016 at 9:01pm |
|
I have a WD, I call restored but it is a working (Yard work) tractor but I take it to shows so it is that too. Was done 13 years ago so it shows its age again.
|
|
|
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
|
![]() |
|
1terrygladys
Silver Level
Joined: 03 Oct 2013 Location: SW Iowa Points: 261 |
Post Options
Thanks(0)
Quote Reply
Posted: 18 Dec 2016 at 9:02pm |
|
My first restored tractor was the WD-45 I grew up on. It was a parade tractor for awhile, but I needed it too much on the farm. So now it's what you'd call an "old restoration" with scratches and oil leaks. But if I get the chance, I'll still clean it up and drive it in a parade. And when I do, I always put the 3 bottom plow in the snap coupler. And on top of the plow, I clamp a big sign which says, "Isaiah 2:4 - they will beat their swords into plowshares", with the name of the church I'm serving and our hours of worship. ... It doesn't get much better than drivin' an old AC for the Lord!!!!
Terry
|
|
|
WD-45, WD, Unstyled WC, SC Disk, JD 4430D, JD 4010D, JD B, Iowa pastor & disciple of Jesus Christ
|
|
![]() |
|
Phil48ACWC
Silver Level
Joined: 17 Jan 2013 Location: Vermont Points: 314 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2016 at 8:55am |
Here's my WC that goes to parades, plows snow, mows with a 6' finish mower, discs fields, skids logs, runs a 13.5 KW emergency generator, tows various trailers. pulls a 6' York rake, and plenty of other things. It gets used year round. |
|
![]() |
|
Bull
Orange Level Access
Joined: 28 Sep 2010 Location: Lamar, Missouri Points: 589 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2016 at 9:24am |
|
Hey Terry, what you do with the sign is awesome. Colossians 3:23 comes to mind.
|
|
|
WD45 Diesel, RC,CA,IB, B, G, 616, Early B-10, D-10, Terra Tiger, 95G spreader, SC blade
|
|
![]() |
|
1terrygladys
Silver Level
Joined: 03 Oct 2013 Location: SW Iowa Points: 261 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2016 at 9:42am |
|
Thank you, Bull! Ah yes - "Work hard and cheerfully at whatever you do, as though you were working for the Lord, and not for people." ... The world would be a much better place if all people took these words of Scripture to heart!!!
|
|
|
WD-45, WD, Unstyled WC, SC Disk, JD 4430D, JD 4010D, JD B, Iowa pastor & disciple of Jesus Christ
|
|
![]() |
|
1terrygladys
Silver Level
Joined: 03 Oct 2013 Location: SW Iowa Points: 261 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2016 at 9:44am |
|
Nice WC, Phil!
|
|
|
WD-45, WD, Unstyled WC, SC Disk, JD 4430D, JD 4010D, JD B, Iowa pastor & disciple of Jesus Christ
|
|
![]() |
|
TedBuiskerN.IL.
Orange Level
Joined: 11 Sep 2009 Location: Davis, IL. Points: 1959 |
Post Options
Thanks(0)
Quote Reply
Posted: 19 Dec 2016 at 5:47pm |
|
I do what I call "Preservation restorations" If it gets paint, it may be over some dirt in the nooks and crannies that the pressure washer didn't get. If it leaks, it gets fixed, if it seeps, maybe not. Mine are all ready to use when or if needed, and will usually perform with the best.
|
|
|
Most problems can be solved with the proper application of high explosives.
|
|
![]() |
|
Post Reply
|
|
|
Tweet
|
| Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |