| Author |
 Topic Search  Topic Options
|
rcpulls 
Bronze Level
Joined: 29 Apr 2020
Location: Longwood
Points: 3
|
 Post Options
 Thanks(0)
 Quote  Reply
 Topic: seals for m&w 4 & 1/8 sleeves for WD
Posted: 29 Apr 2020 at 10:25am |
|
need help finding the 4 &1/8 seals for my WD Allis
any help appreciated
Edited by rcpulls - 29 Apr 2020 at 10:27am
|
 |
|
Sponsored Links
|
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 87638
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Apr 2020 at 6:20pm |
I think i would get the diameter and cross section thickness of the o-ring and order . Probably get them at Auto Zone or NAPA... but surely you can order on line from mcMaster Carr...
here is a reference discussion....
|
|
Like them all, but love the "B"s.
|
|
steve(ill)
Orange Level Access
Joined: 11 Sep 2009
Location: illinois
Points: 87638
|
Post Options
Thanks(0)
Quote Reply
Posted: 29 Apr 2020 at 6:41pm |
original rings were probably Buna-N material... These Viton are a little more antifreeze resistant. You probably need the 4-1/2 or 4-3/4 diameter rings.. If in between, get the smaller size.. They stretch easily...... You need to know if you need .070 , .100 , or .140 ring thickness.
Edited by steve(ill) - 29 Apr 2020 at 6:43pm
|
|
Like them all, but love the "B"s.
|
|
rcpulls
Bronze Level
Joined: 29 Apr 2020
Location: Longwood
Points: 3
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2020 at 6:31am |
|
thanks for the info but the problem i running into is the seals are not round
they are wider than they are thick on the m&w sleeves
|
|
DrAllis
Orange Level Access
Joined: 12 Sep 2009
Points: 21853
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2020 at 6:53am |
|
Pretty sure they are an odd/special thickness and no longer available. They were round when new and are pretty thin.
Edited by DrAllis - 30 Apr 2020 at 6:53am
|
|
Pfouts Family Farm
Bronze Level
Joined: 05 Dec 2018
Location: Hiram, Ohio
Points: 177
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2020 at 8:51am |
RCPULLS,
We may have what you need. Let me know the width and depth of the groove on your sleeve. Give me a call (440) 570-3653
Mark Pfouts
|
|
Fred in Pa
Orange Level
Joined: 13 Sep 2009
Location: Hanover Pa.
Points: 9210
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2020 at 9:54am |
Been using .093 thick o ring for years on these .
|
|
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
|
Brian G. NY
Orange Level
Joined: 12 Sep 2009
Location: 12194
Points: 2259
|
Post Options
Thanks(0)
Quote Reply
Posted: 30 Apr 2020 at 4:00pm |
Try this place: Global O-Ring and Seal, LLC.Great people to deal with.If you go to this site, I'm sure you will be able to get the O-rings you need for your sleeves.
They have groove measurement charts and they can fix you up with any size imaginable.
They also explain what composition O-rings fit what application.
You can speak to them on-line or by phone and they will gladly help with determining exactly what you need.
|
|
