looking for a crank and conecting rod
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=99887
Printed Date: 26 Nov 2024 at 5:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: looking for a crank and conecting rod
Posted By: Ronnie
Subject: looking for a crank and conecting rod
Date Posted: 03 Jan 2015 at 10:10am
|
I am looking for a crank or conecting rod for a 16hp brigs out of a 3416 simplicity. I could use a rod that is over sized so I can grind my crank.thanks
|
Replies:
Posted By: HudCo
Date Posted: 03 Jan 2015 at 5:17pm
|
we overhauled a 16hp briggs for a customer a year ago i think the only rod still available from briggs was standard also the only piston avialable is 30 over if you grind the crank you have to have an undersize rod there are only standard cranks still avilable some of the balance gears, cam and other parts are not we had to use ablock from a small lincoln welder and use a new crank rod piston some of that model did not have pionts so do not mix up the flywheel if the tractor is driven off the flywheel side you may be able to just use the whole saying because there are quite a bite of those old welders around that still run good but do not weld any welder or generator engine will have a tapered crank on the pto side you could have the crank welded the engine mensioned above had a welded crank and was still turned 10 under the person inthis engine before realley messed it up
|
Posted By: ACmowerguy
Date Posted: 04 Jan 2015 at 12:14am
The undersized rods are still available through Rotary and Prime Line. The original Briggs # is 390306. You might be able to find an NOS one left over on eBay if you prefer to have an OEM rod. As for pistons:
STD = B&S 390364 Sub to # 792365 $ 66.50 List
.010 = B&S 390365 Available only through ROTARY aftermarket.
.020 = B&S 390366 Sub to # 792367 $61.95 List
.030 = B&S 390367 NLA through all outlets.
A lot of the aftermarket items can be had pretty cheap through www.tulsaenginewarehouse.com
-------------
10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
Posted By: HudCo
Date Posted: 04 Jan 2015 at 6:54pm
|
sorry a bout that sould have checked stock on some off the parts . the tractor that i mentioned stoped running one day about three months after we over hauled the engine so the customer brought it back for warranty. would not start had spark but would not fire. the mag neto on that engine can be moved sevral degree s before and after tdc. messed around a full day changing timing checking valve clearance carberation had the briggs tech department on the phone, it would pull an arc off of the spark plug wire 1 1/8 inch to the block but the engine would not fire the briggs guys had us send pics of it making that much arc long story short i got the polarity indicator out of my tool box and started checking wheels off of engines in the scrap pile somhow the mag net had changed polarity used the wheel of the doner engingine was also out in the scrap never missed a beat since
|
Posted By: Ronnie
Date Posted: 04 Jan 2015 at 7:20pm
Posted By: Matt Tallant
Date Posted: 04 Jan 2015 at 8:07pm
|
I got a complete engine for 150.00 if interested in Blacksburg VA
|
Posted By: Ronnie
Date Posted: 05 Jan 2015 at 9:20pm
|
Ok I will keep that in mind how many hours were on ur engin
|
Posted By: Matt Tallant
Date Posted: 05 Jan 2015 at 9:24pm
|
Hours unknown out of a 7016
|
Posted By: Ronnie
Date Posted: 05 Jan 2015 at 9:29pm
|
O ok is it a good strong running engine and does it smoke?
|
Posted By: Matt Tallant
Date Posted: 06 Jan 2015 at 6:17am
|
Never heard it run but comes with starter generator
|
Posted By: Ronnie
Date Posted: 06 Jan 2015 at 12:00pm
Posted By: HudCo
Date Posted: 06 Jan 2015 at 3:23pm
|
that sounds like a pretty good deal for everyone no matter what
|
|