Garden Tractors - F/S tight steering box for 616 620 720

Print Page | Close Window

F/S tight steering box for 616 620 720

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=99743
Printed Date: 26 Nov 2024 at 4:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: F/S tight steering box for 616 620 720

Posted By: fasstman
Subject: F/S tight steering box for 616 620 720
Date Posted: 31 Dec 2014 at 5:00pm

I just pulled a tight steering box out of a parts tractor. I am putting power steering in mine so I do not need this one. $100.00 obo plus ride. P.M. me if interested.

Replies:

Posted By: coggonobrien
Date Posted: 02 Jan 2015 at 11:22am

What are you using for power steering

Posted By: fasstman
Date Posted: 02 Jan 2015 at 4:36pm

Seen someone here or simpletractors that put a GM 605 box in.

Posted By: coggonobrien
Date Posted: 02 Jan 2015 at 6:04pm

interesting, wondering how much hp it will suck to run it.

Posted By: HudCo
Date Posted: 03 Jan 2015 at 5:28pm

any reason why you could not run it of the aux.hyd. that are allredy there i think those boxes run some where around 900 to 1100 psi but i do not know for sure would realy like to see how you do it my wd45 has factory ps. and i love it

Posted By: Steve in NJ
Date Posted: 03 Jan 2015 at 6:53pm

That is interesting, being that I have a loader to put on mine. Right now would be the time to do it being its apart. I'll have ta' do a little research on dat'...

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: fasstman
Date Posted: 03 Jan 2015 at 7:02pm

The 605 looks really tight in the spot on the pics I seen. There was no pto shaft in it. The fittings might hit. I might start on it next weekend. I am going through my hydro now. I would like to be able to use the hydro for the 605. I will have to try it out.

Posted By: fasstman
Date Posted: 03 Jan 2015 at 7:13pm

I have to figure out how to tie into the lines. I do not have any factory aux ports left. I have all four quick connects in the front.

Posted By: HudCo
Date Posted: 03 Jan 2015 at 7:37pm

my 616 tees of of the ports for the three piont for the front remotes but mine only has two one of those lines on the hydro with constant presure would be the one and one return to tankor may be tee into one of the oil cooler lines return off the steering box does not have much presure a few years ago me and a buddy was rigging up a portable 12v over hyd unit for his chev pulling truck because we didnot want to run the ps pump onthe motor i had gauges all hooked to get some presureses for some reason but i do not remember the numbers

Posted By: fasstman
Date Posted: 05 Jan 2015 at 11:42am

Steering box is sold.