Farm Equipment - Wanted: 200 tach

Print Page | Close Window

Wanted: 200 tach

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9960
Printed Date: 01 Feb 2025 at 11:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Wanted: 200 tach

Posted By: Don Jr NY
Subject: Wanted: 200 tach
Date Posted: 24 Mar 2010 at 6:32am

Hi Guys. I thought I would look here before I go the route of having mine rebuilt. I'm looking for a good looking and working tach gauge for a 200 tractor with the two speed pto. On mine the needle works but the hour meter doesn't move. I'm not sure if any other models have the same gauge or are calibrated the same so I would like one that is definitely off a 200. Thanks in advance. Don Jr.

Replies:

Posted By: JoeO(CMO)
Date Posted: 24 Mar 2010 at 7:26am

Don, looking at the face of the tach, where are the low and high PTO rpm lines? I have some good tachs and may be able to match one.

Posted By: d17brown
Date Posted: 24 Mar 2010 at 7:52am

how much for a good tach

Posted By: Don Jr NY
Date Posted: 25 Mar 2010 at 6:38am

Joe, the red or 1st pto line is at 1950 rpms an the green or 2nd pto line is at 2100 rpms. D17brown do you have one off a 200 for sale? If so how much are you asking? Thanks in advance guys. Don Jr.

Posted By: d17brown
Date Posted: 25 Mar 2010 at 7:04am

no ,looking for one

Posted By: legn4
Date Posted: 25 Mar 2010 at 8:05pm

I have a NOS tach with a cracked lens hours read 0000.01 . It has NO red or green PTO line . Iam thinking it was for a pump or generator etc. 0 rpms on left (facing unit) & 2500 on right. More writing on tach can send pic if needed. $150 + shipping Thanks /Eddie

Posted By: JoeO(CMO)
Date Posted: 26 Mar 2010 at 6:23am

Don, the PTO lines don't match up