Construction and other equipment - H3 Steering Clutch Removal

Print Page | Close Window

H3 Steering Clutch Removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9940
Printed Date: 11 Apr 2025 at 11:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H3 Steering Clutch Removal

Posted By: dirtdobber
Subject: H3 Steering Clutch Removal
Date Posted: 23 Mar 2010 at 7:58pm

I have removed the spring retainer from the shaft and ready to slide the shaft to the inside of housing but I have not been able to move the shaft any using the one hole that is visable.

Anyone have a suggestion as to my next step to try to slide the shaft out of the pressure plate and clutch assembly.

Thanks for any help.

Replies:

Posted By: Kipn
Date Posted: 24 Mar 2010 at 9:26am

I have heard that heating it then pouring cold water on it helps loosen up the rust. Might try putting air hammer to it. Mine came out fine. Search previous threads, as there was one a month or so ago on this subject.

-------------
1961 H3