Pulling Forum - 175 cam in a wc

Print Page | Close Window

175 cam in a wc

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=99381
Printed Date: 24 Nov 2024 at 10:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 175 cam in a wc

Posted By: Clay2017
Subject: 175 cam in a wc
Date Posted: 23 Dec 2014 at 3:01pm

Considering doing the 175 cam in my wc. What supporting mods do I need to go with this if any? How much should I pay for the cam? Where to find one?

Replies:

Posted By: WF owner
Date Posted: 23 Dec 2014 at 6:50pm

175 (gas) cams are about as plentiful as hen's teeth. There are some guys that will custom grind a cam for you. From what I have seen on here, expect around $250.00.

Posted By: Gary in da UP
Date Posted: 23 Dec 2014 at 7:00pm

You won't find a cam easily, get yours reground. A wd45 crank, 175 pistons, a wd45 carb, pertronix module and coil, or a magneto in tip-top shape. This will give your WC a lot of snort for not much money. You can go crazy but with a mild build like this and some good firestone 14.9x24 or 28" tires, you'll surprise those who spend more and think they need 38's to win.

Posted By: mike a
Date Posted: 25 Dec 2014 at 9:24am

dont forget to have the carb re-built. i sent mine to Motec Eng. tipton,in.for what its worth worth,i have run 28's and now 38's-build the rims -run the big rubber.