Garden Tractors - 616 hyd control lever

Print Page | Close Window

616 hyd control lever

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=97843
Printed Date: 26 Nov 2024 at 4:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 616 hyd control lever

Posted By: HudCo
Subject: 616 hyd control lever
Date Posted: 15 Nov 2014 at 9:57am

is there a two lever set up for the hyd.controls it looks like there is room one more linkage and lever set up by looking at the bushings on the shafts have not been in deep enought to see if there happens to be an extra ports on the valve

Replies:

Posted By: den/southern illinoi
Date Posted: 15 Nov 2014 at 2:17pm

Not sure on the 616 but on the 720 there was what was called the 720 Special. It had only one control lever to control both the front hydraulic ports and the 3 point hitch. It is possible on the 616 that you have that they tied them together same as the 720 Special and have only one lever. If you get to the hydraulic valve bank, you will soon know for sure. Den

-------------

Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.

Posted By: wsherm
Date Posted: 15 Nov 2014 at 2:58pm

Yes you can add a two lever valve. There are mounting holes for the valve. You would also need the hydraulic lines to go to the front of the tractor.

Bill

Posted By: D-17_Dave
Date Posted: 21 Nov 2014 at 10:45pm

I have a parted out tractor. Several 2 spool valves and line sets. Easy conversion
Text or call me is best way to reach me. 336 695 2193
Dave H

-------------
Yea, I can fix that.....