190xt
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=97526
Printed Date: 24 Nov 2024 at 9:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190xt
Posted By: cb550
Subject: 190xt
Date Posted: 09 Nov 2014 at 9:39am
|
Was told you can get a delete coupler or shaft to eliminate the PD on a 190xt. Where can I get these, how do they work? Any info would be greatly appreciated...thanks.
|
Replies:
Posted By: DrAllis
Date Posted: 09 Nov 2014 at 9:47am
|
There are two ways to go. One is a simple coupler that leaves you with four speeds....2nd-4th-6th-8th. I make a sliding coupler that leaves you with all eight speeds. I suppose I could also make another coupler that would provide 1st-3rd-5th-7th. (I guess that makes three ways to go).
|
Posted By: cb550
Date Posted: 09 Nov 2014 at 10:00am
|
Thanks for the reply. Would be interested in the sliding coupler...greater selection of speeds would be better depending on track conditions. Could you tell more a bit more about it? Do u slide it with a shifter, or is there more involved than that?
|
Posted By: 2wise4agm
Date Posted: 09 Nov 2014 at 11:09am
|
Interested in knowing more about this as well.
|
Posted By: DrAllis
Date Posted: 09 Nov 2014 at 12:25pm
|
Shift lever under the platform usually. I have seen it made up thru the platform too.
|
Posted By: TeamAllis
Date Posted: 09 Nov 2014 at 8:05pm
Dr. Allis, I need your phone #, have a friend that is interested in the shifter for a 185.
Thanks
|
Posted By: acwd45di
Date Posted: 08 Dec 2014 at 1:06pm
|
Dr allis could you email me i would like to talk to you more about this modd as im currently building a xt puller acwd45di@yahoo.com thanks i apreciate it
|
Posted By: bsallis180
Date Posted: 08 Dec 2014 at 10:46pm
|
We have used the manual PTO leaver, linkage and home made shifting fork on the 180 so you can switch the 2speed from the seat
|
|