Farm Equipment - WD conversion

Print Page | Close Window

WD conversion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9681
Printed Date: 21 Jan 2025 at 2:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD conversion

Posted By: twotall911
Subject: WD conversion
Date Posted: 18 Mar 2010 at 6:42pm

on the six volt to twelve volt conversion alternator the 10S1 what should i use one wire or two ive been told this is too big for the space to be put in any ideas thanks

Replies:

Posted By: Bill_MN
Date Posted: 18 Mar 2010 at 10:33pm

you want to use the 3 wire version, the one wire does not work at low RPMs. should fit fine just need to use a bolt spacer with the stock bracket or there are a few guys who make custom brackets for an alternator conversion.

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow

Posted By: twotall911
Date Posted: 19 Mar 2010 at 2:40am

thanks for the info