half gears in d 21
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=95792
Printed Date: 24 Nov 2024 at 8:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: half gears in d 21
Posted By: timmypuller
Subject: half gears in d 21
Date Posted: 01 Oct 2014 at 12:15pm
|
i need to replace the clutch in my d 21 and while i am at it i would like to put in some half gears. could i make the low range of the range tranmission the half gear. i would then have a 5 1/2,6 1/2, 7 1/2 and 8 1/2 in that range and 5,6,7 and 8th in high range? any info on who could do this and what cost would be?
|
Replies:
Posted By: injpumpEd
Date Posted: 01 Oct 2014 at 12:32pm
If you're serious about doing something in the trans, call Mark Gettinger. 765-977-9348
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: wi50
Date Posted: 01 Oct 2014 at 12:34pm
Engler, Humpco and Atlas tractor.
I'm close to Atlas, Carl is good, but is just plain over worked it seams. I've always had great luck, but I know some people have had issues getting their parts in a reasonable time frame.
-------------
"see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet"
|
Posted By: brads180
Date Posted: 01 Oct 2014 at 9:28pm
|
I used Mark for my D-21 did great job and was done in the time he said it would be done.
|
Posted By: ACFarmer
Date Posted: 02 Oct 2014 at 11:36am
I run Marks trans in my 8070, he can build you whatever you need.
-------------
Making A living everyday farming with and working on Allis Equipment
|
|