M7 Snow Tractor Parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=95771
Printed Date: 28 Apr 2024 at 9:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: M7 Snow Tractor Parts
Posted By: M29
Subject: M7 Snow Tractor Parts
Date Posted: 30 Sep 2014 at 9:48pm
|
Hi All I am new to this forum and have an avid interest in the Allis Chalmers M7 Snow Tractor. I recently acquired a fairly large lot of M7 Snow tractor Parts. If anyone on this forum is looking for parts for this machine let me know what parts you are in need of and I will let you know if I have it. Dan
 |
Replies:
Posted By: dpower
Date Posted: 30 Sep 2014 at 11:58pm
| sent you a private message |
Posted By: DiyDave
Date Posted: 01 Oct 2014 at 4:47am
| Dpower, he may not be able to PM you back, not enough posts... |
Posted By: Rickm7
Date Posted: 28 Dec 2014 at 1:30am
| I am looking for a telescopic flue, for my m7, and windshild, |
Posted By: stahlhouse
Date Posted: 01 Jan 2015 at 11:40pm
| I am looking for some side shields and a windshield and some other various parts |
Posted By: SHAMELESS
Date Posted: 06 Jan 2015 at 7:58am
| i'd like to have an M7! |
Posted By: GlenninPA
Date Posted: 06 Jan 2015 at 11:39am
|
I have a NOS M7 pintle hitch for sale. ------------- Good judgment comes from experience. Experience comes from bad judgment. From listening comes wisdom and from speaking comes repentance. Wise men learn more from fools than fools from the wise. |
Posted By: dustydoo
Date Posted: 07 Jan 2015 at 5:48am
| I am new to the allis family never seen one before Almost have to find one for myself Anybody know where there are any for sale?? |
Posted By: Gary(WI)
Date Posted: 17 Jan 2015 at 8:28pm
| There used to be a new wiring harness for one on ebay Gary |
Posted By: dustinmo
Date Posted: 20 Jan 2015 at 6:29pm
| I was looking for an M7 pintle hitch, Glen what do you want for it and does anyone else have one they want to come off of |
Posted By: Kevinsandberg
Date Posted: 24 Dec 2018 at 7:13am
| I'm needing tracks for my M7, are there any out there for sale or has anyone made a set and has so tips? |
Posted By: Kevinsandberg
Date Posted: 24 Dec 2018 at 7:14am
| Do you have any tracks for sale for the M7? |
Posted By: DSeries4
Date Posted: 24 Dec 2018 at 11:02am
This post is from 4 years ago. Good luck. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Kevinsandberg wrote:Posted By: dpower
Date Posted: 24 Dec 2018 at 8:29pm
|
Either find a set of NOS ones or the military fix to them was weld chain around the inside of the track pads to keep them together. I heard a military parts place over in Czech Republic was making new ones. Mine has the chain welded around them. |
Posted By: poniatowski
Date Posted: 13 Apr 2019 at 9:56am
|
Is this post still active? I'm looking for some body tin and the windshield. What is it with former owners taking off that windshield assembly? Ron
|
Posted By: Kevinsandberg
Date Posted: 13 Apr 2019 at 3:05pm
| What body tin are you looking for? |
Posted By: poniatowski
Date Posted: 14 Apr 2019 at 1:40pm
My M7 was converted into a vehicle to pull ice fishing shanties off of Northern Wisconsin lakes, so the entire back end was modified with a 'shack' of its own. I'm missing the rear body tin around the driver and passenger, the louvers around the engine and lower engine panels. All belly tin and the windshield assembly. I found new mounts for the windshield, the originals were cut.  What I have for tin is the hood, front grill, two side fairings over the fenders by the driver's knees and... well, that's about it! Fortunately, I had a chance to measure an M7 and can make much of it, but I'd sure like to find a windshield assembly! Thanks for asking! Ron |
Posted By: poniatowski
Date Posted: 14 Apr 2019 at 1:49pm
Here are two photos from photos... so poor quality. Anyway, as found and after removing all of the non-M7 'stuff'.  |
Posted By: Kevinsandberg
Date Posted: 14 Apr 2019 at 2:09pm
| I have a windshield assembly, and I would be able to have someone make one for you if you like. Don't have any idea how much it would cost however. |
Posted By: poniatowski
Date Posted: 14 Apr 2019 at 4:52pm
|
That would be great! I don't need the glass installed. I think that if the basic outer tube frame is fabricated, I could do the rest. Thanks again for the offer. Ron
|
Posted By: poniatowski
Date Posted: 06 May 2019 at 5:14pm
|
I found the inner glass portion of the windshield, but still need the outer (tubular) frame assembly. I see it has a 'slide in' hinge like other vehicles. Ron
|
Posted By: Zacpua
Date Posted: 22 Jun 2019 at 10:17pm
|
Do you have a set of tracks |
Posted By: Kevinsandberg
Date Posted: 23 Jun 2019 at 5:48am
| No, I'm needing a set for mine. |