Garden Tractors - engine swap

Print Page | Close Window

engine swap

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=95664
Printed Date: 26 Nov 2024 at 2:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: engine swap

Posted By: blazen orange
Subject: engine swap
Date Posted: 28 Sep 2014 at 8:25pm

OK here goes I swapped a Kohler 20 horse vertical shaft for a Briggs and Stratton 18 horse vertical shaft and the problem I'm having is the wiring. I was hoping someone would have a simple to read wireing diagram to make this swap work thanks

Replies:

Posted By: Steve in NJ
Date Posted: 29 Sep 2014 at 9:05am

What I would do is go online, look up your model Tractor with the Kohler and find a wiring diagram. Next, look up the same Tractor or find an equivalent Tractor that's close that was available with the B/S engine and see what the difference is in the wiring. Probably isn't much difference...
Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: HudCo
Date Posted: 29 Sep 2014 at 11:57am

need to know which reg. is on the briggs also antifire soliniods on the carbs its simple if you pm me that will be the easy way for me to get it hooked up

Posted By: blazen orange
Date Posted: 30 Sep 2014 at 3:53am

I actually found a diagram on line and got it figured out. It took me a while to find and after that I had it running in about a half hour thanks all the same guys.