1920 DA electric clutch issues
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=95108
Printed Date: 21 Nov 2024 at 8:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1920 DA electric clutch issues
Posted By: DougG
Subject: 1920 DA electric clutch issues
Date Posted: 14 Sep 2014 at 2:11pm
|
Could someone please explain how the front electric clutch works on a 1920 Deutz Allis garden tractor,, i have current to it but it quit
|
Replies:
Posted By: Lynn Marshall
Date Posted: 16 Sep 2014 at 7:26am
|
I think that the ground for the clutch has to go through the sear safety switches???
|
Posted By: HudCo
Date Posted: 16 Sep 2014 at 5:23pm
|
real simple test unplug clutch with two jumper wires hook one terminal two bat. pos. the other two bat neg. dos not matter what terminal if clutch locks in then it is working so you have a problem in your electical system probley the on off switch. if it does not but yuo can push the plate in on the pully then you might be able to press the pully and plate in closer to the magnet that does not happen very often
|
Posted By: Coke-in-MN
Date Posted: 19 Sep 2014 at 1:20pm
The ring of wire creates a magnetic force and pulls plate into the iron plate that turns with engine . If it does not pull in problem with coil or electric going to coil ,
Test coil with multimeter or just power up with jumper wire .
Should create a magnetic effect -
-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."
|
|