smoked my clutch
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=94781
Printed Date: 24 Nov 2024 at 7:34pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: smoked my clutch
Posted By: Fields
Subject: smoked my clutch
Date Posted: 06 Sep 2014 at 8:37pm
|
Smoked my wd45 clutch. Pulled a 5 mph class and slipped it bad. 9 spring with stronger springs and a 6 pad disk. I do have a new organic disc at home. Will it hold up to say 70 or so hp. Going to have the flywheel turned.
|
Replies:
Posted By: WF owner
Date Posted: 06 Sep 2014 at 9:11pm
I believe Rick on here is the clutch expert.
His email is rickinmo@socket.net
|
Posted By: DrAllis
Date Posted: 07 Sep 2014 at 9:13am
|
3-pad disc will hold more than 4-pads.......4-pads will hold more than 6-pads. Fiber disc won't hold as much as 6-pads as a rule.
|
Posted By: XT in pa
Date Posted: 07 Sep 2014 at 10:53am
I need a number to get ahold of rick. My email won't work. Thanks.
-------------
190XT,D17and 7045
|
Posted By: mgburchard
Date Posted: 12 Sep 2014 at 5:00pm
|
Does anyone know if there's a pressure plate from some other brand that will fit the WD 45 flywheel that has more than 9 springs?
|
Posted By: Fields
Date Posted: 12 Sep 2014 at 9:35pm
|
Is there a valve spring that is stronger than the pressure plate springs.
|
Posted By: mgburchard
Date Posted: 13 Sep 2014 at 2:08pm
|
Oh yeah when you run 1.5 od valve springs for aggressive camshaft ramp profiles you start destroying 9 spring pressure plates why I need a tweleve spring plate .
|
Posted By: DrAllis
Date Posted: 14 Sep 2014 at 9:39am
|
You can run a spring inside of the existing spring, if you are maxxed out on spring pressure. Beyond that, a second disk and floater plate will double clutch torque capabilities.
|
Posted By: WCCLASON
Date Posted: 16 Sep 2014 at 8:13pm
|
yup... I am running 65 HP at the PTO and i have a stock pressure plate with a semi ceramic 4 puck disk... very jumpy but it locks up. Never had a slip. Bob i think that is the way u should go unless you are going to go way bigger with your motor. Contact Steves Ag Diesel if i remeber right and he will set you up with the same disk i have.
|
|