Farm Equipment - WD light switch

Print Page | Close Window

WD light switch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9429
Printed Date: 20 Jan 2025 at 7:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD light switch

Posted By: dpage02
Subject: WD light switch
Date Posted: 13 Mar 2010 at 6:35pm

I'm installing a replacement light switch. The replacement switch does not have any of the terminals labeled. I do not have the old switch to compare for the wiring hook-up so I want to be sure I do it right. From an old schematic-1. I see the generator wire going to the terminal near the resistor block on the switch. 2. The terminal that connects to the fuse should go to the lights. 3. That means the odd terminal goes to the ammeter.

When I checked for continuity between terminals-the only connection was when the switch was pulled all the way out. No continuity in the off position or the middle position. Do I have that right?