Farm Equipment - D15 GOVERNOR

Print Page | Close Window

D15 GOVERNOR

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9364
Printed Date: 20 Jan 2025 at 2:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D15 GOVERNOR

Posted By: D-SERIES
Subject: D15 GOVERNOR
Date Posted: 12 Mar 2010 at 12:00pm

MY D15 GOVERNOR SHAFT IS WORN AND WOBBLES AND MACHINES GOVERNOR DOES NOT OPERATE PROPERLY BECAUSE OF THIS. DOES ANYONE HAVE A GOOD GOVERNOR CAP ASSEMBLY OR A GOOD WAY TO FIX MY PROBLEM? THANKS

Replies:

Posted By: Rogers
Date Posted: 12 Mar 2010 at 8:41pm

You can get an after market governor. I have seen them on several websites for around $175. As far as the front cover and wobble. There is a bronze bushing in the cover that can be replaced. It is cheap and easy to replace.

-------------
Think for yourself and be your own expert. Be willing to change your mind; however, willingness to change your mind doesn’t mean that you will. Blindly following any path is the pinnacle of insanity.

Posted By: GregLawlerMinn
Date Posted: 13 Mar 2010 at 10:18am

If your govenor is wobbling, you either need to rebuild it, or replace it before the govenor disintegrates and breaks teeth in your cam and/or distributor drive gears. Awhile back I replaced the govenor assy on my D15 SII. The pins had wobbled out the holes in the weights and the front bushing was also egg shapped. One can obtain a govenor rebuild kit (new weights, pins, bushings); I chose to purchase a new govenor assy and bushing for the front of the cap. If I remember correctly, the replacement govenor assy I obtained from Sandy Lake Implement (SLI) was interchangeable between the CA, D10,D12,D14, and D15.