NICE UNSTYLED WC RADIATOR NEEDED!!!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9343
Printed Date: 20 Jan 2025 at 6:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: NICE UNSTYLED WC RADIATOR NEEDED!!!
Posted By: Unstylish
Subject: NICE UNSTYLED WC RADIATOR NEEDED!!!
Date Posted: 12 Mar 2010 at 6:33am
|
Here we go again, needing parts. Must be sound, and pretty nice. Let ME know what YOU want for it. Closer to Mich the better. PM me..thanks
|
Replies:
Posted By: Michael Crowe
Date Posted: 12 Mar 2010 at 10:06pm
I have a very nice flat top radiator that is on a styled WC. The motor runs fine, charging system works, rear wheels have surface rust, but not rusted through, 1 rear tire is ok, the other is not, front tires/wheels are junk. It is a 39 styled WC with an unstyled radiator. It has a new battery box and water pump. The motor has a distributor conversion. $750 as is. Located in Kansas City, MO. 816 898 7277
-------------
The 14th Annual Exclusive AC Swap Meet will be held in Boonville, MO, March 7-8, 2025. See the club website for details: http://www.moacclub.com/
|
Posted By: Ray
Date Posted: 12 Mar 2010 at 11:18pm
Posted By: Unstylish
Date Posted: 13 Mar 2010 at 7:26am
|
Mike, I'd love to have the flat top radiator, but it is just too far away for me to buy the tractor and haul it home JUST for the radiator. Ray, I'll be giving you a call when I get of work...thanks..
|
Posted By: Rick of HopeIN
Date Posted: 13 Mar 2010 at 7:30am
|
I can bump you to the top. I need a hood for my 37, with no extra holes. Mine was chopped out for a styled manifold. Can probably patch it, but always looking.
|
Posted By: Unstylish
Date Posted: 13 Mar 2010 at 1:47pm
|
yeah, bump me to the top. Maybe if we can find a parts tractor together...lol..
|
Posted By: Andrew Kimbrough
Date Posted: 13 Mar 2010 at 2:00pm
|
I cant help you with a radiator as I already sold mine.. but I do have a good uncracked block from one I am parting out. Asking $150 plus an extra $50 for the pressure plate and clutch ect if you want that. I will also have the skeleton left after the block is out if anybody has any interest in it for scrap price. Would still have a tranny, rearend, aftermarket seat and some other misc. parts
Located in Muncie, IN
|
Posted By: Unstylish
Date Posted: 14 Mar 2010 at 8:29am
Mike, if you decide to part that, let me know...it should fit my 47 hood, right?
-------------
The problem with reading MLPANKEYS posts, is that they dont make boots that tall.
|
|