Wd45 won't start
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=93189
Printed Date: 24 Nov 2024 at 6:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Wd45 won't start
Posted By: farmer_rob
Subject: Wd45 won't start
Date Posted: 01 Aug 2014 at 8:42pm
Rebuilt starter and it is now switched from 6 to 12v.
I replaced coil/points/condensor and rotor .
I was wanting to switch it also to neg ground but not getting power to the coil once switch is on.
It will really crank over very fast but no spark. It still has the gen but not connected. It will start if I crank it then touch the gen wire to the starter but shut off once I remove that wire .
What am I missing?
Looked at my cousins d15 and his I400 both are 12v neg ground
-------------
if farming was easy everybody would be doing it
|
Replies:
Posted By: XT in pa
Date Posted: 01 Aug 2014 at 9:13pm
When switching to neg ground the wires on coil need switched and so does amp gauge. Sounds like coil is gettin power from generator ?? Should be the on position on key switch. Shawn.
-------------
190XT,D17and 7045
|
Posted By: farmer_rob
Date Posted: 01 Aug 2014 at 9:23pm
Cousins two tractors are wired different at the coil but both work.
I ended up switching it back to pos ground and got that result. Neg ground I had nothing.
I was wondering if I had to wire the gauge different
-------------
if farming was easy everybody would be doing it
|
|