Pulling Forum - another 180 pull

Print Page | Close Window

another 180 pull

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=93163
Printed Date: 31 Oct 2025 at 5:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: another 180 pull

Posted By: rowcropmafia
Subject: another 180 pull
Date Posted: 01 Aug 2014 at 8:22am

http://youtu.be/CS3-ax8xYxE

this pass was in 8th gear. 4th place run. 1 foot behind the leader

Replies:

Posted By: Charlie175
Date Posted: 01 Aug 2014 at 9:11am

That looks to be quite the ride!

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD

Posted By: farmer_rob
Date Posted: 01 Aug 2014 at 8:43pm

How much hp does that 180 have inorder to be able to run 8th gear

-------------
if farming was easy everybody would be doing it

Posted By: omahagreg
Date Posted: 01 Aug 2014 at 9:27pm

Sounds and looks really nice!

-------------
Greg Kroeker
1950 WD with wide front and Freeman trip loader

Posted By: rowcropmafia
Date Posted: 01 Aug 2014 at 9:53pm

I dont know how much power it has never had it on a dyno. I have heard some I pull with are well north of 500 horse at 3000 rpm

Posted By: farmer_rob
Date Posted: 01 Aug 2014 at 9:58pm

Ok
Are you still using stock clutch and rear end components?
I guess opening the pump up to 90-95 isn't going to be much of an issue then

-------------
if farming was easy everybody would be doing it

Posted By: farmer_rob
Date Posted: 01 Aug 2014 at 9:58pm

I can't open that link for some reason

-------------
if farming was easy everybody would be doing it

Posted By: rowcropmafia
Date Posted: 01 Aug 2014 at 10:43pm

Im using a 3 disk clutch. Power director converted to a coupler. Needle bearinged differential. You have to copy and paste to another page. I dont know how to put videos directly on here.

Posted By: DougG
Date Posted: 02 Aug 2014 at 6:08am

That was a great run , tractors looking awesome , keep er rolling

Posted By: Beirnesy
Date Posted: 02 Aug 2014 at 7:25am

Here is the link to the youtube video, nice pull.

I notice more pullers injection pumps with that "Hunting" in and out sound?

http://www.youtube.com/watch?v=CS3-ax8xYxE&feature=youtu.be" rel="nofollow - http://www.youtube.com/watch?v=CS3-ax8xYxE&feature=youtu.be

-------------
1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716

Posted By: DrAllis
Date Posted: 02 Aug 2014 at 7:58am

RPM's are limited to 3,000.....watch the smoke....you can see the governor is in control.

Posted By: DougG
Date Posted: 02 Aug 2014 at 9:49pm

I have a 180 that runs 4500 rpms, does great but thinking of going to the 3000 rpm class, my question is, whats your fuel system and whats your pulling schedule, id like to see it run in person

Posted By: rowcropmafia
Date Posted: 03 Aug 2014 at 11:57am

I pull next Thursday in Georgetown IL, Friday in Rossville IL. Most of the pulls I go to are with the Illiana Pullers Association. Feel free to give me a call if you have any questions 217-255-3678