Forklift Identification Assitance
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=93071
Printed Date: 26 Jun 2024 at 11:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Forklift Identification Assitance
Posted By: treeman
Subject: Forklift Identification Assitance
Date Posted: 29 Jul 2014 at 9:45pm
|
I have a 1959/60 fork lift that I need some help identifying the engine in. I've been searching the web and can't find much to go on. The Load Capacity Chart on the fender says "500 Series Fork Lift". On the top of the mast is plate that says Model 614 serial #1073. The marking on the side of the block are "AM4339-3" with a "2" below. Under where the carb is it appears to say "4C". The block has cracked and I need to identfy the engine so that can search for a suitable replacement. Any help would be great, thanks |
Replies:
Posted By: Mrgoodwrench
Date Posted: 29 Jul 2014 at 11:08pm
|
Pics would help ------------- There are 3 ways to do job GOOD, FAST, CHEAP. YOU MAY CHOOSE 2. If its FAST & CHEAP it won't be GOOD, if it's GOOD & CHEAP it won't be FAST, and if its GOOD & FAST it won't be CHEAP!!!! |
Posted By: treeman
Date Posted: 29 Jul 2014 at 11:37pm
| I will take some. The ones I have the file size are too big. Thanks, Paul |
Posted By: treeman
Date Posted: 31 Jul 2014 at 9:08am
|
Posted By: treeman
Date Posted: 31 Jul 2014 at 9:12am
|
Posted By: treeman
Date Posted: 31 Jul 2014 at 9:14am
|
Posted By: treeman
Date Posted: 31 Jul 2014 at 9:17am
My son found this id plate. Not sure where it is located. |
Posted By: DiyDave
Date Posted: 31 Jul 2014 at 6:34pm
| 160 cu in gas motor, like in a D-15 series 2, or 175 cu in diesel, or 200 cube direct ignition diesel, in later models. |
Posted By: treeman
Date Posted: 01 Aug 2014 at 11:00pm
| Thank you for the help |