616-620 cable pulleys
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=93014
Printed Date: 31 May 2024 at 6:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 616-620 cable pulleys
Posted By: Tracy Martin TN
Subject: 616-620 cable pulleys
Date Posted: 28 Jul 2014 at 9:14pm
The front lift cable pulley. Does that pulley just turn on a shouldered bolt, or is there a bushing or bearing in it. I can't find my parts manual to see how it works. Thanks Tracy
-------------
No greater gift than healthy grandkids!
|
Replies:
Posted By: DSeries4
Date Posted: 28 Jul 2014 at 10:07pm
It is not a shouldered bolt, it is welded directly to the frame. The pulley sits on it. There is no easy way to fix it when the shoulder wears down. I have that problem on mine. Sandy Lake confirmed that is the way they were made. Haven't fixed mine yet.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: Tracy Martin TN
Date Posted: 28 Jul 2014 at 10:29pm
I will patch mine for now. I will make new ones when I restore it and add a bronze bushing. thanks Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: Steve in NJ
Date Posted: 29 Jul 2014 at 6:43am
Noticed that on my 620 when I was doing the tear-down for the resto. The pulleys just spin on the welded stud Myron is talking about. Mine are worn also which tells me there was a mower deck at one time under mine, but wasn't there when I purchased the machine. One cable is just about shot anyway, but I'm not using the machine to mow with so I'm leaving the pulleys and cables off. I'll leave the side shields for the cables on though..
Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: JoeO(CMO)
Date Posted: 01 Aug 2014 at 4:00pm
are the cables available
-------------
|
|