Farm Equipment - Need help on a 190xt/185

Print Page | Close Window

Need help on a 190xt/185

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=9200
Printed Date: 20 Jan 2025 at 8:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need help on a 190xt/185

Posted By: jeff n
Subject: Need help on a 190xt/185
Date Posted: 09 Mar 2010 at 7:33am

I am looking to put the hi/low out of a 185 into a190xt has anyone done this?if so how hard is it and how do you do it.

Thanks for your help,Jeff . (It is a pulling tractor)

Would like to shift on the go.

Replies:

Posted By: Kevin in WA
Date Posted: 09 Mar 2010 at 8:57am

I would'nt use the 185 power director, it has one less plate on each side than the 190xt. Just rebuild the 190xt with 7000 drive plates , they are stronger because they don't have the holes in them. I am pretty sure the 190 part # subs to the 7000 # from AGCO now. they should have done this 35 years ago.