Construction and other equipment - allis m steering clutches

Print Page | Close Window

allis m steering clutches

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=91307
Printed Date: 04 Jul 2025 at 7:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: allis m steering clutches

Posted By: ew
Subject: allis m steering clutches
Date Posted: 20 Jun 2014 at 7:45am

looking for advice on how to get tractor apart to replace steering clutches?

Replies:

Posted By: Gargoyle
Date Posted: 20 Jun 2014 at 10:35am

I just had my 11E out clutches twice, so I got a routine down, but I don't know enough to know if they are similar.

If someone else chimes and says these are the same, I can tell you what I did, if it's worth anything.. Of course, I'm a newby and some of the other guys might think what I did is not so great..... lol

Posted By: MNLonnie
Date Posted: 20 Jun 2014 at 12:38pm

For steering clutches on an M you need to remove the tracks and final drives to get to them. They do not come out the top like the newer crawlers.

-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker

Posted By: Ages Cat
Date Posted: 20 Jun 2014 at 3:26pm

We just finished putting steering clutches, drums, oil seals, pinion bearings, etc in our HD-5 B. My best advice is get a service manual for the tractor.

Posted By: everett048
Date Posted: 20 Jun 2014 at 11:10pm

It is easy enough to do but as mn lonnie says it is a tracks of job and final drives out if you need more advice pm me
Regards
Mark