Garden Tractors - b112 attaching front wheel

Print Page | Close Window

b112 attaching front wheel

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=89336
Printed Date: 25 Nov 2024 at 8:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: b112 attaching front wheel

Posted By: jagmon0520
Subject: b112 attaching front wheel
Date Posted: 10 May 2014 at 7:27am

Hi everyone I am new to the forum. So please excuse my inexperience with terminology. My issue is that after greasing the front end my front wheel has come of the axle. I looked at an old diagram I have of the front end but still don'tunderstand how the wheel stays on the axle. Any assistance in explaining how the whe on would would greatly appreciated

Thank you in advance
joe
e.

Replies:

Posted By: AaronSEIA
Date Posted: 10 May 2014 at 8:21am

According to my parts book there should be a washer on the outside of the outer bearing and then a collar and set screw. The Simplicity number for it is 703150. Runs around $5 from some on line places. Might be able to take the other side off and get some measurements for it.
AaronSEIA

Posted By: jagmon0520
Date Posted: 10 May 2014 at 8:41am

Do you know where i could order all of the needed parts along with a repair manual

Posted By: AaronSEIA
Date Posted: 10 May 2014 at 9:32am

Sandy Lake Imp is a great supporter of this site and a couple of other Simplicity/AC mower sites. 888-252-0656. You can find repair manuals on CD on eBay. I have one but it is rather vague at best for a lot of things. There is the assumption that the person doing the work is mechanically inclined. They might know of a hard copy of a Simplicity service manual as well. I have a PDF of one I could send you that covers far more than just the B112. I have found for basic stuff, it's ust as easy to ask on this page or the Simple Tractors site.
AaronSEIA

Posted By: littlemarv
Date Posted: 10 May 2014 at 2:33pm

The bearings are the same as on a small trailer, I've gotten them from Napa.

I found my local hardware store actually carries quite an assortment of the collars with setscrews- 3/4" is whats on the steer axle I believe. Might find washers or machine spacers as well, that would work.

-------------
The mechanic always wins.

B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H

Posted By: Don Jr NY
Date Posted: 11 May 2014 at 5:20am

Jagmon0520 where are you located in NY? If your front wheel has the dust cap still on it then take that off and the outer bearing and locking collar should still be in your rim. Don Jr.