Farm Equipment - D-17 rear housing

Print Page | Close Window

D-17 rear housing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8897
Printed Date: 19 Jan 2025 at 11:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-17 rear housing

Posted By: Darrell G (MN)
Subject: D-17 rear housing
Date Posted: 03 Mar 2010 at 6:45am

I am looking for a rear housing for a D-17 series 2 or the entire rear clip. thanks

Replies:

Posted By: Chris/CT
Date Posted: 03 Mar 2010 at 6:49am

There is one sitting in CT here at friends shop, let me know if would like his contact info. He does have trucks on the road, maybe able to help with delivery.

Posted By: Slade (TN)
Date Posted: 03 Mar 2010 at 8:09am

I have a ser III here in TN Darrell......if that helps....course it's a looong trip for a '17 rearend.

Slade

615-542-6999

Posted By: Skyhighballoon(MO)
Date Posted: 03 Mar 2010 at 8:24am

Darrell - might want to check the Worthington salvage yard in MN. If you go to a Series III or IV rear you need to upgrade to the new style band-acutated disc brakes.

There were FIVE different housing used across the four series with SN breaks at 1) before 240001 2)24001 to 38898 3)38899 to 42000 4) 42001 to 75000 5) 75001 & up. If you use one of the later housings to replace a tractor before SN 38899 there is a list of transmission input shaft and related parts that must be updated as the newer housings after SN38899 & up were updated to a double row ball bearing on the front bore. Mike

-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers

Posted By: Terry
Date Posted: 03 Mar 2010 at 8:27am

may have a rear end assy in about a month or so don't know if series 2 or not , would be in eastern S. D. If interested Call 605 - 886 7198 thanks Terry

Posted By: Troy
Date Posted: 03 Mar 2010 at 12:34pm

darryl can you give me a casting number i should have just a rear housing for a early d17, call me 507 421 0213, troy south minnesota.

Posted By: niel ev
Date Posted: 03 Mar 2010 at 12:58pm

We have a couple of rearends here in various states and I thing the last one we pulled the engine out of was a series 2 if you get me our serial number I'll see how close I can get to yours Niel

Posted By: skipwelte
Date Posted: 03 Mar 2010 at 2:54pm

Ive got one Darrell, housing has diff and trans gears in it, I dont know the s/n for sure but it has a 3 bar grille. You can have it for haulin the lawn tractor back from Indiana if thats ok. I wont be able to bring it until some snow melts so I can get the pickup out, or you can come and get it. Lemme know!!!

Posted By: Gary(OR)
Date Posted: 03 Mar 2010 at 3:44pm

I've got one also, late series II.

Posted By: Darrell G (MN)
Date Posted: 03 Mar 2010 at 8:02pm

Skip, please send me your phone number again, I misplaced it, a memory is a terrible thing to lose

Posted By: AndyinWI
Date Posted: 03 Mar 2010 at 9:27pm

I have one too that i don't want sitting around!