Mitch Pankey
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=88111
Printed Date: 28 Nov 2024 at 7:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Mitch Pankey
Posted By: mgburchard
Subject: Mitch Pankey
Date Posted: 15 Apr 2014 at 6:20pm
| You are the MAN Mitch |
Replies:
Posted By: CAL(KS)
Date Posted: 15 Apr 2014 at 6:39pm
|
I cant possibly see how this post could lead to anything productive ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: blue924.9
Date Posted: 15 Apr 2014 at 7:48pm
|
well this thread isnt going to last long ------------- hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share |
Posted By: Honey B
Date Posted: 15 Apr 2014 at 8:13pm
| I think he is it's always about 26 people to only one MITCH. |
Posted By: Butch(OH)
Date Posted: 15 Apr 2014 at 8:23pm
|
Rah, rah, rah
 |
Posted By: mgburchard
Date Posted: 15 Apr 2014 at 8:32pm
|
mgburchard wrote:Posted By: Thad in AR.
Date Posted: 15 Apr 2014 at 8:39pm
| Why can't he post his own pics using his new user name??? He didn't get kicked off of the Y T forum recently did he? Is that why he's back with a new name and the same old stupid lies. |
Posted By: Carl(NWWI)
Date Posted: 16 Apr 2014 at 12:10am
| I like the stove pipe welded to the manifold and the first grader fuel line hose and routing. What a joke. I did better work in middle school.... |
Posted By: DiyDave
Date Posted: 16 Apr 2014 at 6:00am
| I thought his new name here was rob rolando, or something like that. I think emboogered needs the axe, for bringing his name up, on here again... |
Posted By: patrickmull
Date Posted: 16 Apr 2014 at 6:06am
| why is water running down the block right below and behind the inlet of the carb and more of that crazy hose routing and at 41 sec in the video what is the spark that comes out at the top of the engine |
Posted By: Larry W.
Date Posted: 16 Apr 2014 at 7:53am
Oh it sounds so awesome, I can't wait to ORDER my Pank Performance motor!! ..... said no one ever!! 
|
Posted By: THE-MAN
Date Posted: 16 Apr 2014 at 10:21am
|
That clip was about 43 seconds long...Sadly that was probably a third of that motors life span... Sounds like my old 360 inch motor did with a Murphys 206/198 cam did, but mine rapped snappier and idled more rythmic. I will say congrats on getting something running. Its only been alot of humiliation. I understand why its not on YT, although maybe they would keep in on for more than 5 minutes for entertainment purposes. Maybe Ill post it on the other new forum. We like stuff like this to make the week go faster. And, I mean, its not like we rag on you any less. .... Still, its an accomplishment. Like winning the special olympics. I will say that Buchard is being trained well. He managed to bump the gov linkage with out getting caught up in the fan somehow. Shows how much air that motor must be lacking. The black smoke is horrendous. Anything with a head and manifold that Marty built has taken me alot of extra work to GET it to smoke, because of the volume they move. But, with as many cubes as that has, I would think it would be a little harder tp feed. I guess not. Maybe now you can run against CotnCrazy. He wins alot, and you live by him right>? |
Posted By: blue924.9
Date Posted: 16 Apr 2014 at 10:26am
so where is this new site at ------------- hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share |
Posted By: mgburchard
Date Posted: 16 Apr 2014 at 10:41am
| Cute get up Butch |
Posted By: Butch(OH)
Date Posted: 16 Apr 2014 at 11:25am
Why thank you but I am taken so do get any ideas OK?  I am glad to see you got one running even if it was only a re-ring job on a Shipman built motor. Around these parts we call that an overhaul job not a "build" but still takes some skill to accomplish over and above one finger keyboarding. Be certain to stand back if you rev it up remember build #1,, Keeeer POW!!! |
Posted By: Charlie175
Date Posted: 16 Apr 2014 at 11:48am
|
He's talking about the FB pulling group ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: THE-MAN
Date Posted: 16 Apr 2014 at 1:41pm
| I for one am pretty excited. Not we can see video of it pulling and running down the track, so compare it to allllll the vids Marty posted. Its put up or shut up time I guess. Even if its for "a customer" (har har) he must live under a rock (funny how he hasnt chimed in ever) to not know that his "builder" makes all sorts of claims alll over the internet. And with a setup like it has on there, with that goofy carb and plumbing mess, it will be easy to recognize at local pulls by forum members. So, pulls in East Tn are starting up here soon. Lets see some Marty quality videos on youtube. |
Posted By: wi50
Date Posted: 16 Apr 2014 at 2:16pm
|
Well now that it runs you have no excuses to avoid Lawrence Wilsons dyno challenge.....rember boys August 2nd
------------- "see what happens when you have no practical experience doing something...... you end up playing with calculators and looking stupid on the internet" |
Posted By: Ihateillinoisnazis
Date Posted: 16 Apr 2014 at 10:12pm
Since I'm a betting man, I bet this thing isn't running by August 2nd. If it is it never hit the track... |
Posted By: Butch(OH)
Date Posted: 17 Apr 2014 at 4:09pm
Dang Tenn videos are just like them Tenn injuns, they run a couple days and then ,, POOF
 |
Posted By: OrangeFever
Date Posted: 17 Apr 2014 at 7:28pm
| That Tennessee special won't last as long as this thread. |
Posted By: Ihateillinoisnazis
Date Posted: 18 Apr 2014 at 9:40pm
So true Butch! I didn't even get to see the video before it went away. Must be made of unobtanium like the rest of spunkys fibs. |
Posted By: Hudsonator
Date Posted: 21 Apr 2014 at 7:12pm
|
Beat on Pank all you want, leave my State out of it. Understand? ------------- There isn't much a WC can't do. WD's just do it better. |
Posted By: Slade (TN)
Date Posted: 21 Apr 2014 at 7:18pm
|
Amen hudsonator.. Slade(TN) |
Posted By: Gary
Date Posted: 22 Apr 2014 at 6:42am
|
. . I have often wondered where the expression 'Hanky Pankey' came from ! Gary |