clutch
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=87765
Printed Date: 28 Nov 2024 at 5:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: clutch
Posted By: Ronnie
Subject: clutch
Date Posted: 09 Apr 2014 at 11:28am
|
I have a 190 that i run in a 6000 to 8000 pound class the pump is guted and it runs realy good i am puting biger injectors in in a few weeks and i need a clutch the class has a 3000 rpm limit it is using the factory 2500 gas engin clutch right now it doesnt slup but the drive disk is going bad. what would be a good clutch to run . I would say it is making a bout 150 to 180 on hp it runs 5and 6 gear right now. |
Replies:
Posted By: XT in pa
Date Posted: 09 Apr 2014 at 11:37am
|
When I pulled my xt bout 6 years ago I put a HD allis 200 clutch in it. I never knew the hp on it but it slipped the hydraulic pto at 175. And it would run 10,000 lb class with 20.8x38 in 6th gear. We just farm with it now and it's 126hp. ------------- 190XT,D17and 7045 |
Posted By: Ronnie
Date Posted: 09 Apr 2014 at 11:54am
| That sounds like a good running 200 . I was thinking bout using a xt3 clutch u think it is the same as a 200 |
Posted By: Ronnie
Date Posted: 09 Apr 2014 at 11:58am
| Wood a clutch out of a 105 white work i can put heavy springs in one for a 105 |
Posted By: DougG
Date Posted: 09 Apr 2014 at 12:46pm
| Xt series 3 + 200 are the same, pretty much, but some have 6 pads and others have 4 pad ceramic, get a 4 button ceramic clutch disc, the pressure plate also needs heavy duty springs, i think the shops call them Lavender color, Unique Automotive in Jonesburg Mo can put one together for what your wanting to do very resonable priced too, |
Posted By: Bob C IL
Date Posted: 09 Apr 2014 at 4:42pm
| WTF!!!! 190 hp 5th or 6th gear.... put in a SFI setup before you kill someone.... kill yourself that's one thing but someone else!!!! |
Posted By: patrickmull
Date Posted: 09 Apr 2014 at 5:33pm
| Bob he is running a 190XT tractor at a 150 hp |
Posted By: AC200Puller
Date Posted: 09 Apr 2014 at 6:23pm
| If you are running over rated engine rpm I would highly recommend a steel flywheel. |
Posted By: Bob C IL
Date Posted: 09 Apr 2014 at 7:57pm
| Over rpm over hp... Ok give em somethin to talk about over on pulloff... It ain't my ass, I'm just givin advice.. GO FOR IT |
Posted By: Ronnie
Date Posted: 09 Apr 2014 at 9:08pm
| Sorry at in pa I ment 190 not 200 |
Posted By: Ronnie
Date Posted: 09 Apr 2014 at 9:14pm
| I am using a xt3 flywheel can I get a steel one as a hole set up I would like to get something to handle 400hp and 7 gear or am I going to be fin running the xt3 fly wheel and a heavy pressure plate with a 4 button disk |
Posted By: Bob C IL
Date Posted: 09 Apr 2014 at 9:20pm
| 400 hp wow.... Not only the flywheel but how bout the cast iron 2 speed between your legs? Hope your finished with your jewels.... |
Posted By: Ronnie
Date Posted: 10 Apr 2014 at 6:03am
| The pd is down the road for now i wont to keep it i was going to have a pd bilt out of steel i realy like having shift on the go and im not going strate to 400hp i no i can our run a 180 hp tractor so im just gessing im a round 150 to 180 i have plans to dyno it in a few months to get an exat number i am just wonting to do this clutch job once |
Posted By: Ronnie
Date Posted: 10 Apr 2014 at 11:12am
| So i need a 4 pad drive disk and a heavy 190 xt3 or 200 pressor plate |
Posted By: DougG
Date Posted: 10 Apr 2014 at 11:21am
| I just reread ur post, is this a gas tractor? |
Posted By: injpumpEd
Date Posted: 10 Apr 2014 at 12:31pm
------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
DougG wrote:Posted By: Ronnie
Date Posted: 10 Apr 2014 at 1:12pm
| No its a diesal 301 out of a 8010 with a guted injection pump and maby 3000 rpm g springs |
Posted By: Ronnie
Date Posted: 10 Apr 2014 at 1:14pm
| If u read the post it has gas engin pressor plate and drive disk not a gas engin |
Posted By: DougG
Date Posted: 10 Apr 2014 at 3:12pm
| Ok, gottcha,, |