6080 Puller
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8773
Printed Date: 19 Jan 2025 at 4:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6080 Puller
Posted By: BrianC,Ont
Subject: 6080 Puller
Date Posted: 28 Feb 2010 at 1:25pm
Is there anybody on here that has any pictures of 6080 pullers. Has anyone seen or fabbed a narrow front. Tractor data says the lowest weight is 7590, would like to put it in the 6500 class. If any one has one they pull what class do you pull in. Also this tactor has no motor, what other Allis equipment had the 433. Would likley trade the FWA front axle, cab, and hyd arms for the parts that I need. 
|
Replies:
Posted By: BrianC,Ont
Date Posted: 28 Feb 2010 at 1:38pm
Sorry about the pic size.
|
Posted By: michaelwis
Date Posted: 28 Feb 2010 at 1:41pm
|
looks 2 me u got a project on yur hands .... ------------- WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer |
Posted By: powertech84
Date Posted: 28 Feb 2010 at 9:04pm
| personally, i think if it were mine i would part the entire thing and put the money towards something a little more common. Custom parts are expensive. |
Posted By: BrianC,Ont
Date Posted: 28 Feb 2010 at 9:09pm
| I would go with a wide front if I could get the weight down to 6500. Dont know if I could shave 1200 lbs off of the tractor by going to 38" pressed wheels and removeing everything else I dont need. |
Posted By: SteveM C/IL
Date Posted: 28 Feb 2010 at 9:14pm
| F2 combines 78 and later used the 433 but don't have the crank thrust "fix" used for the tractors. |
Posted By: roosky01
Date Posted: 28 Feb 2010 at 9:34pm
|
I think a 301 would fit in there very nice...
------------- Government always finds a need for whatever money it gets. Ronald Reagan |
Posted By: BrianC,Ont
Date Posted: 28 Feb 2010 at 10:01pm
| Is the 301 a bolt in as far as the torque tube goes. I was thinking of putting a V8 in it, but then I would only be able to pull in the exhibition class. |
Posted By: Allis Fields
Date Posted: 28 Feb 2010 at 10:43pm
| I bet you could sell the 4x4 conversion parts and use a D-17 narrow. |
Posted By: injpumpEd
Date Posted: 02 Mar 2010 at 10:27am
|
you can use the rear plate off a 433, it should bolt onto a 301. a 433 is a 4 cyl version of a 301. you'd have to redo frame rails. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |