Farm Equipment - WD valve clearance

Print Page | Close Window

WD valve clearance

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8749
Printed Date: 19 Jan 2025 at 2:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD valve clearance

Posted By: Osage_Orange
Subject: WD valve clearance
Date Posted: 27 Feb 2010 at 10:24pm

I would appreciate someone posting the "cold" settings for WD intake and exhaust valve clearances. Saw it posted recently, but cannot find it now........tx..........O_O

-------------
Why is there never time to do it right the first time, but always time to go back and fix it?

Replies:

Posted By: MNLonnie
Date Posted: 27 Feb 2010 at 11:02pm

My WD book calls for .012".

-------------
Waukesha B, B, IB, G, styled WF, D15, 615 backhoe, 2-Oliver OC3's, 4 Ford Model T's, 3 Model A Fords, AV8 Coupe, AV8 Roadster, 1933 Ford Wrecker

Posted By: Bob D. (La)
Date Posted: 28 Feb 2010 at 5:28am

Set em at .014 cold. You should be good to go then. HTH God Bless.

-------------
When you find yourself in a hole,PUT DOWN THE SHOVEL!!!

Posted By: Jeff Z. NY
Date Posted: 28 Feb 2010 at 6:29am

Set them around 0.014 cold.

After the engine is hot check them and set at 0.012.