d17 series 4 air filter questions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8726
Printed Date: 19 Jan 2025 at 11:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: d17 series 4 air filter questions
Posted By: ChuckLuedtkeSEWI
Subject: d17 series 4 air filter questions
Date Posted: 27 Feb 2010 at 11:34am
|
Does anyone have the napa part number for the air filter for a D17 series 4? I picked one up today and we had a heck of a time finding the right one as it wasn't listed anywhere and we tried to use the old one as a comparison but they are a hair different. Also, the end of my air filter canister must have went missing at one time and the previous owner cobbled a cap with a piece of rubber tire tubing to seal it, and I would like to make something that looks like the original end cap and functions better then this one to seal it up. Or if someone has a cap and retaining bracket that is good, I would be interested in that also. Thanks.
|
Replies:
Posted By: Skyhighballoon(MO)
Date Posted: 27 Feb 2010 at 2:34pm
Chuck - I've bought Fram air filters for my Series IV...headed to the farm tonight and will write down the number...CAxxxx. Good luck finding that end...mine's bad and I was going to go the inner tube route with some kind of rigid plastic disc over it. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Russ-neia
Date Posted: 27 Feb 2010 at 3:55pm
The best I could come up with for the end cap was to cut the side out of a slip-on high top rubber boot, the kind with fabric bonded to the rubber. A Northerner or LaCrosse style boot is what I used, then spayed it orange. Looks very close to the original.
-------------
The innovators offer what others will imitate.
|
Posted By: Skyhighballoon(MO)
Date Posted: 02 Mar 2010 at 7:51am
Chuck - the Fram air filter is CA229 for a D17 SIII or SIV. If anyone is interested, I checked the spare for my One-Eighty and that Fram number for the air filter is PA1667-FN. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Bryan L
Date Posted: 02 Mar 2010 at 8:58pm
I don't know if this help or not. The NAPA website list a 2504 Filter
for a D-17 Series IV. Bryan
|
Posted By: RodneyNWIL
Date Posted: 02 Mar 2010 at 9:45pm
|
Chuck Contact Bill Deppe for new end to the canister.I think he was reproducing them and not to bad a price.563-652-2949
|
Posted By: Dwayne TX
Date Posted: 03 Mar 2010 at 2:39pm
|
I've got new AGCO rubber gasket for a Series IV if anybody needs one. I think it was almost $30, but I'd cut someone a deal that needs it.
|
|