Allis Chalmers HD11E Clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=86925
Printed Date: 30 Jun 2025 at 3:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers HD11E Clutch
Posted By: jchance
Subject: Allis Chalmers HD11E Clutch
Date Posted: 24 Mar 2014 at 7:52am
|
hi all, my clutch has gone on my HD11E, where can i source a new one i have looked everywhere. |
Replies:
Posted By: gemdozer
Date Posted: 24 Mar 2014 at 4:24pm
| I have 2 HD11 wet cluch desassembly if I can help |
Posted By: jchance
Date Posted: 24 Mar 2014 at 8:19pm
| thank you, i think mine is a dry type clutch though |
Posted By: jchance
Date Posted: 24 Mar 2014 at 8:21pm
| how can i tell if a dry or a wet clutch ? |
Posted By: Lazyts
Date Posted: 24 Mar 2014 at 10:24pm
| HD11E serial number 8321 should be a wet clutch- reservoir under rear of oil pan, spin-on filter on rear of clutch housing. Wet clutch came around 6400 serial number range, 1961 or so. |
Posted By: jchance
Date Posted: 24 Mar 2014 at 10:47pm
|
yes it has the spin on filter on the clutch housing in the rear underneath. so it must be the wet clutch. would i just need to put new friction plates on or do i need a whole new clutch |
Posted By: gemdozer
Date Posted: 25 Mar 2014 at 4:29am
|
Before you removed the cluch make sure your oil tank is full and check if your cluch pump and oil filter are in good condition. |
Posted By: jchance
Date Posted: 25 Mar 2014 at 6:54am
|
thank you how do i check if the clutch pump is working correctly ? |
Posted By: gemdozer
Date Posted: 25 Mar 2014 at 4:24pm
| Make sure your oil tank under rear pan is full and with the motor running you could disconnet a hose from oil filter you should see if the pump have a good pression or disconnect the hose from the small pump near the fuel pump |