Farm Equipment - D19 Finals on a 190XT

Print Page | Close Window

D19 Finals on a 190XT

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8678
Printed Date: 19 Jan 2025 at 1:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D19 Finals on a 190XT

Posted By: Mark D.
Subject: D19 Finals on a 190XT
Date Posted: 26 Feb 2010 at 11:36am

I have heard that D19 finals can be used in a 190XT rear to achieve a faster final ratio in a puller. What all is needed to get them to fit?? Just brake shaft and bull gears? Can the brakes work from the XT? thanks

Mark

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA

Replies:

Posted By: DrAllis
Date Posted: 26 Feb 2010 at 12:39pm

D19 bull gears and bull pinion gears.....the hard part is finding a new enough D19 to have the "fine" splines on the bull pinions so they will fit into the 190XT differential side gears. Old D19's were coarse spline like WD's and old D17's.

Posted By: niel ev
Date Posted: 26 Feb 2010 at 3:09pm

Mark if you find out you need the bull pinions let me know we have 3 D19s in the parts yard and I can pull some out and see if they are what you need Niel

Posted By: Gary IN
Date Posted: 26 Feb 2010 at 4:22pm

Also have a parts d 19 go to battle creek quite often if thats close. Thanks Gary IN

Posted By: Mark D.
Date Posted: 27 Feb 2010 at 7:30am

Thanks! Does anyone know the serial number break on the D19 to get the right one? Also, if I have a 190XT series III with the big axles, will those fit the D19 bull gears? Thanks Again!

-------------
Miss Behavin - D21 Super Farm

Xcessive Tinkering - 190 XT Hot Farm Puller

Watch on YouTube - http://www.youtube.com/watch?v=J2TX1Af7aoA