Pulling Forum - Gleaner Z question

Print Page | Close Window

Gleaner Z question

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=86145
Printed Date: 31 Oct 2025 at 10:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Gleaner Z question

Posted By: graveyard
Subject: Gleaner Z question
Date Posted: 10 Mar 2014 at 11:01am

I have a gleaner z 226 in my d 17. Has anyone ever ran the mechanical fuel pump on this motor in pulling?

Replies:

Posted By: DrAllis
Date Posted: 10 Mar 2014 at 12:19pm

There's no need to do that. Some Antique Clubs wouldn't allow it. Suit yourself.

Posted By: Gary in da UP
Date Posted: 10 Mar 2014 at 4:57pm

Gravity flow is plenty, the pump is just more parasitic drag... and one more part to fail....

Posted By: pohlman249
Date Posted: 10 Mar 2014 at 8:52pm

Just get rid of the sediment bowl and run street elbows in1/4 pipe to a shut off then a filter and drilled out 1/8" pipe into the carb and open up the needle and seat if you already haven't and that should be more then enough file flow.

Posted By: graveyard
Date Posted: 12 Mar 2014 at 7:49pm

I actually have done that. Have no gas problem just seeking information!! thanks guys