Pulling Forum - 180 - 190 Needled Differential Pin

Print Page | Close Window

180 - 190 Needled Differential Pin

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=86023
Printed Date: 12 May 2024 at 5:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180 - 190 Needled Differential Pin

Posted By: O.P.S. Heads
Subject: 180 - 190 Needled Differential Pin
Date Posted: 07 Mar 2014 at 9:56pm

Replies:

Posted By: Bob C IL
Date Posted: 10 Mar 2014 at 1:02pm

Would it be the same in my 7000?

Posted By: O.P.S. Heads
Date Posted: 10 Mar 2014 at 8:24pm

Nope. Your 7000 has a four pinion differential. Instead of one straight pin and two spiders it is a cross with four spider gears. Won't work for you.

You can do the same thing to your cross but you would have to remove the differential and disassemble it to get the cross out. With the two pinion it is possible to change from a standard, non - needled pin to a needled pin without removing the differential. Remove the back plate / lift arm housing from the rear housing, remove the old and pin and install the new. Similar to doing a pregnancy check a Holstein.

Posted By: Bob C IL
Date Posted: 10 Mar 2014 at 8:37pm

I almost think I'd rather have the holsteen

Posted By: MACK
Date Posted: 21 Mar 2014 at 9:37pm

Bore the gears and press in a needle bearing. MACK

Posted By: WildBill
Date Posted: 29 Mar 2014 at 8:19pm

Any Left ?

-------------
Allis fan for life ! B,C,2-WC'S,WD45G,D19G,190xt ,LLSS 8010, terra tiger refurbished

Posted By: O.P.S. Heads
Date Posted: 30 Mar 2014 at 11:28am

Yes. Send me an email or PM.