D19 Cast Wheels
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8566
Printed Date: 19 Jan 2025 at 11:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D19 Cast Wheels
Posted By: Eric NY
Subject: D19 Cast Wheels
Date Posted: 24 Feb 2010 at 6:21am
Spent a couple of hours the last couple of nights freeing up the rear wheels on my D19. I used a set of homemade pusher bolts that Jeff Heitman made me several years ago......they worked great. The wedge inserts looked like they had never been out, but they came apart without too much effort. Cleaned, painted and reintalled everything again. Eric NY
 
|
Replies:
Posted By: Calvin Schmidt
Date Posted: 24 Feb 2010 at 6:53am
| Looks like you are working on a High Crop. Good Work! |
Posted By: skipwelte
Date Posted: 24 Feb 2010 at 4:41pm
|
If they dont want to loosen I whack the end of the axle with a big, big BFH!!! The force is transfered thru the axle to the wedge and helps loosen. Its manditory to wear a faceshield and safety glasses as the paint chips can do a lot of damage to skin and eyes. |