Print Page | Close Window

BD262 in a wd

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=84926
Printed Date: 30 Nov 2024 at 8:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: BD262 in a wd
Posted By: Dswall
Subject: BD262 in a wd
Date Posted: 15 Feb 2014 at 9:49pm
I have a BD 262 out of a D19 and a wd without a motor. Is it worth putting together? I'm thinking about running a few pulls with it. know I need a diesel adapter plate, hood radiator and to change some linkage. I don't know if the tranny and rear end will work. Any suggestions?


Replies:
Posted By: Big Orange
Date Posted: 16 Feb 2014 at 12:32am
you will need to remove some shims from the hand clutch if its a wd45 to make it hold, on a wd that might not be enough to hold it. The trans. will be ok   

Posted By: MACK
Date Posted: 19 Feb 2014 at 7:07am
You will need a WD54D flywheel. I have a pattern for the adaptor.
  The weakest link is the final drives.    MACK


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net