WD45 PTO SEAL
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8489
Printed Date: 15 Jun 2024 at 11:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 PTO SEAL
Posted By: Zyta
Subject: WD45 PTO SEAL
Date Posted: 22 Feb 2010 at 6:07pm
Can you still get this seal?  
|
Replies:
Posted By: norm [ind]
Date Posted: 22 Feb 2010 at 6:33pm
| we stock that seal 1-800-254-3116 |
Posted By: Alberta Phil
Date Posted: 22 Feb 2010 at 7:16pm
| I would think that you could probably take it to any bearing supplier and find a match. |
Posted By: Osage_Orange
Date Posted: 22 Feb 2010 at 7:25pm
|
I needed a "quick fix" a few years ago, and could not find one locally as thick as the original. Went to a bearing supply house, bought two with the correct OD and ID and installed them in tandem. They're still running and don't leak. ------------- Why is there never time to do it right the first time, but always time to go back and fix it? |
Posted By: fixer1958
Date Posted: 22 Feb 2010 at 7:29pm
| Napa has them. Just give them the old one to match it up. About $3 and use 2 as mentioned before. Yours has numbers, mine didn't. |
Posted By: Skyhighballoon(MO)
Date Posted: 22 Feb 2010 at 7:39pm
|
I just bought one from my AGCO dealer, PN 70224779. National Seal #470061. HTH. Mike
------------- 1981 Gleaner F2 Corn Plus w 13' flex 1968 Gleaner EIII w 10' & 330 1969 180 gas 1965 D17 S-IV gas 1963 D17 S-III gas 1956 WD45 gas NF PS 1956 All-Crop 66 Big Bin 303 wire baler, 716H, 712H mowers |
Posted By: Zyta
Date Posted: 22 Feb 2010 at 7:58pm
|
Thanks for all the info Guy's I would like to find one just like the original if possible.
Jim
|
Posted By: norm [ind]
Date Posted: 22 Feb 2010 at 8:11pm
| OUR STOCK IS 224779 |
Posted By: stu(ON)
Date Posted: 22 Feb 2010 at 8:46pm
|
What you have is the original seal made by Chicago Rawhide. Chicago Rawhide was absorbed by SKF Group a couple of decades ago, and they gradually phased out the CR unique seals. I actually found a New Old Stock CR seal of the right size a year or so ago by shopping at a local hydraulic & seal shop.
You might find some NOS AGCO or CR if you shop long & hard. But, if Norm [Ind] has got them in stock, you are farther ahead just to have him ship one to you.
|