chaning corn head spacing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=8458
Printed Date: 19 Jan 2025 at 11:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: chaning corn head spacing
Posted By: clint
Subject: chaning corn head spacing
Date Posted: 22 Feb 2010 at 9:19am
|
lm 438
on 38 to 36
just need the 2 spocket things right? then move everything over?
how long would that take?
if i do that i might go to 34- but then i wouls have to do 2 heads and 2 planters
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
Replies:
Posted By: SHAMELESS
Date Posted: 23 Feb 2010 at 2:10am
Posted By: Dans 7080
Date Posted: 23 Feb 2010 at 2:47am
|
is it a black or orange corn head? the black uses the same parts just a shorter or longer main beam everythings adjustable on a black head.
|
Posted By: CTuckerNWIL
Date Posted: 23 Feb 2010 at 6:08am
With my Wood Brothers I just drive a little closer to the row I'm pickin'. LOL I couldn't resist.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: clint
Date Posted: 23 Feb 2010 at 11:22am
|
black head
how long of a job is this?
-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62
|
Posted By: skipwetle NWIA
Date Posted: 23 Feb 2010 at 2:02pm
|
Ive done a few row spacing changes on the black heads, its an all day long affair as all the bolts comes out of the tin work, all the row units have slide, the worst was the torx bolts holding the wear plate at the end of the snaping rollers, it might break off or strip out. Now these heads were new, everything wasnt rusted, the first one took a couple of days the second a little longer that a day.
|
Posted By: Russ-neia
Date Posted: 24 Feb 2010 at 4:05pm
You will need to get different coupler shafts for between each row unit. They are specific for each row spacing.
-------------
The innovators offer what others will imitate.
|
|